Your selected equipment
- Make
- VALMET
- Model
- 860.1 (Forwarders)
- Engine
- DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
|---|---|---|---|---|---|
Engine (DT) (SISU 66ETA) |
Premium
|
Maxtron DEO SAE 15W-40
|
6.34
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transfer Gearbox |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
1.19
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Transmission |
From Hydraulics
|
|
|||
Front Differential |
Refer to Technical
|
2.38
|
|||
Coolant |
Refer to Technical
|
10.6
|
|||
Hydraulics |
Ultra Premium
|
Indol Premium Anti-Wear Hydraulic Oil ISO 46
(a, b, c, d)
|
76.6
|
||
Premium |
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
|
||||
Mainline |
Indol EH ISO 46
|
||||
Grease Points |
(e) |
|
|||
Bogie Housing (each) |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
7.53
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Crane Slew Gears |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
1.19
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Front Axle Differential & Reduction Hubs |
Refer to Technical
|
8.45
|
|||
Rear Differential & Reduction Hubs |
Refer to Technical
|
8.45
|
|||
Engine (DT) (SISU 66ETA)
Capacity 6.34(gal)
Transfer Gearbox
Capacity 1.19(gal)
Transmission
Recommendation:
From Hydraulics
Front Differential
Recommendation:
Ultra Premium
Refer to Technical
Capacity 2.38(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 10.6(gal)
Hydraulics
Recommendation:
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 46
Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
Indol EH ISO 46
Capacity 76.6(gal)
Grease Points
Recommendation:
(e)
Bogie Housing (each)
Capacity 7.53(gal)
Crane Slew Gears
Capacity 1.19(gal)
Front Axle Differential & Reduction Hubs
Recommendation:
Ultra Premium
Refer to Technical
Capacity 8.45(gal)
Rear Differential & Reduction Hubs
Recommendation:
Ultra Premium
Refer to Technical
Capacity 8.45(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Alternative recommendations, -13°F to 167°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
- b.
- Alternative recommendations, -4°F to 194°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV
- c.
- Alternative recommendations, 14°F to 194°F: Indol Premium Anti-Wear Hydraulic Oil ISO 46 / Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol EH ISO 46
- d.
- Alternative recommendations, 32°F to 194°F: Hydrostatic Fluid ISO 46 MV
- e.
- Grease Points: manufacturer recommends grease with a temperature range of -30°C to 110°C with penetration of 265-295 MM/10, NLGI 2
Oil Change Intervals
Engine (DT) (SISU 66ETA)
- Hours Min
- 250
- Hours Max
- 400
Transfer Gearbox
- Hours Max
- 500
Front Differential
- Hours Max
- 500
Coolant
- Months Max
- 12
Hydraulics
- Hours Max
- 1000
Bogie Housing (each)
- Hours Max
- 500
Crane Slew Gears
- Hours Max
- 500
Front Axle Differential & Reduction Hubs
- Hours Max
- 500
Rear Differential & Reduction Hubs
- Hours Max
- 500