Close Print

Maxtron DEO SAE 15W-40

Make
VALMET
Model
860.1 (Forwarders)
Engine
DT
Application
Recommendation
Capacity (gal)
Engine (DT) (SISU 66ETA)
Premium
 Maxtron DEO SAE 15W-40
6.34
Mainline
 Superlube TMS SAE 15W-40
Transfer Gearbox
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
1.19
Premium
 MP Gear Lube SAE 80W-90
Transmission
From Hydraulics
Front Differential
Refer to Technical
2.38
Coolant
Refer to Technical
10.6
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 46 (a, b, c, d)
76.6
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
 Indol EH ISO 46
Grease Points
  (e)
Bogie Housing (each)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
7.53
Premium
 MP Gear Lube SAE 80W-90
Crane Slew Gears
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
1.19
Premium
 MP Gear Lube SAE 80W-90
Front Axle Differential & Reduction Hubs
Refer to Technical
8.45
Rear Differential & Reduction Hubs
Refer to Technical
8.45

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations, -13°F to 167°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
b.
Alternative recommendations, -4°F to 194°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV
c.
Alternative recommendations, 14°F to 194°F: Indol Premium Anti-Wear Hydraulic Oil ISO 46 / Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol EH ISO 46
d.
Alternative recommendations, 32°F to 194°F: Hydrostatic Fluid ISO 46 MV
e.
Grease Points: manufacturer recommends grease with a temperature range of -30°C to 110°C with penetration of 265-295 MM/10, NLGI 2

Oil Change Intervals

Engine (DT) (SISU 66ETA)
Hours Min
250
Hours Max
400
Transfer Gearbox
Hours Max
500
Front Differential
Hours Max
500
Coolant
Months Max
12
Hydraulics
Hours Max
1000
Bogie Housing (each)
Hours Max
500
Crane Slew Gears
Hours Max
500
Front Axle Differential & Reduction Hubs
Hours Max
500
Rear Differential & Reduction Hubs
Hours Max
500