Your selected equipment
- Make
- BELLE
- Model
- 7600
- Engine
- D
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
|---|---|---|---|---|---|
Engine (D) (Perkins 104-22) |
Refer to Technical
(a, b)
|
2.51
|
|||
Transmission (Danfoss wheel motors) |
From Hydraulics
|
|
|||
Hydraulics |
Premium
|
Maxtron DEO SAE 10W-30
(c, d)
|
14.5
|
||
Mainline |
Superlube TMS SAE 10W-30
|
||||
Grease Points |
Ultra Premium
|
Maxtron FS NLGI 2
|
|
||
Premium |
Maxtron EP NLGI 2
|
||||
Mainline |
Blue Gard 500+ NLGI 2
|
||||
Reduction Hubs |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
(e)
|
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Engine (D) (Perkins 104-22)
Recommendation:
Ultra Premium
Refer to Technical
Capacity 2.51(gal)
Transmission (Danfoss wheel motors)
Recommendation:
From Hydraulics
Hydraulics
Capacity 14.5(gal)
Grease Points
Recommendation:
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Reduction Hubs
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Alternative recommendations, <14°F: Refer to Technical
- b.
- Alternative recommendations, >73°F: Refer to Technical
- c.
- Alternative recommendations, Hydraulics/hydrostatic system, <14°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- d.
- Alternative recommendations, Hydraulics/hydrostatic system, >73°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
- e.
- Below 23°C only. For use in temperatures consistently above 23°C refer to manufacturer
Oil Change Intervals
Engine (D) (Perkins 104-22)
- Hours Max
- 200
Hydraulics
- Hours Max
- 1000
Reduction Hubs
- Hours Max
- 500