Your selected equipment
- Make
- CATERPILLAR
- Model
- 631E Series II
- Engine
- DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
---|---|---|---|---|---|
Engine (DT) |
Premium
|
Maxtron DEO SAE 15W-40
(a, b, c, d, e, f)
|
11.9
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transmission |
Premium
|
Maxtron Power Transmission Fluid MV
(g)
|
34.1
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Differential |
Ultra Premium
|
Maxtron GL 75W-140
|
39.1
|
||
Premium |
MP Gear Lube SAE 85W-140
|
||||
Final Drives (each) |
Ultra Premium
|
Maxtron GL 75W-140
(h)
|
6.08
|
||
Premium |
MP Gear Lube SAE 85W-140
|
||||
Coolant |
Refer to Technical
|
29.1
|
|||
Hydraulics |
Indol EH ISO 46
(i, j, k, l, m)
|
88.0
|
|||
Auger & Elevator Lower Bearings & Rollers |
Maxtron Enviro-Edge SAE 5W-40
(n, o, p)
|
0.528
|
|||
Auger Drive Gear |
Ultra Premium
|
Maxtron GL 75W-140
|
5.07
|
||
Premium |
MP Gear Lube SAE 85W-140
|
||||
Scraper Wheels (non-driven) |
Power Transmission Fluid SAE 50
(q, r)
|
|
|||
Wheel Coolant (each) |
Refer to Technical
(s)
|
19.8
|
Engine (DT)
Recommendation:
Premium
Maxtron DEO SAE 15W-40
Mainline
Superlube TMS SAE 15W-40
Capacity 11.9(gal)
Transmission
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Capacity 34.1(gal)
Differential
Capacity 39.1(gal)
Final Drives (each)
Capacity 6.08(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 29.1(gal)
Auger & Elevator Lower Bearings & Rollers
Capacity 0.528(gal)
Auger Drive Gear
Capacity 5.07(gal)
Wheel Coolant (each)
Recommendation:
Ultra Premium
Refer to Technical
Capacity 19.8(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
- b.
- 5°F to 122°F
- c.
- Alternative recommendations, -40°F to 50°F: Refer to Technical
- d.
- Alternative recommendations, -22°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
- e.
- Alternative recommendations, -22°F to 86°F: Refer to Technical
- f.
- Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- g.
- Transmission oil viscosity options: -30°C to 10°C, 5W-20 (special synthetic oils without VI improvers); -20°C to 10°C, 10W; 0°C to 35°C, 30; 5°C to 45°C, 40; 10°C to 50°C, 50
- h.
- Final drives, differential and wheel bearing oil viscosity options: -30°C to 40°C, 75W-90 (special synthetic oils without VI improvers); -20°C to 0°C, 80W; -20°C to 40°C, 80W-90, -10°C to 50°C, 85W-140; 0°C to 40°C, 90
- i.
- Hydraulic oil viscosity options: -40°C to 40°C, 0W-20 or 0W-30; -30°C to 40°C, 5W-40; -20°C to 40°C, 10W or 10W-30; 10°C to 50°C, 30; -15°C to 50°C, 15W-40
- j.
- 23°F to 113°F
- k.
- Alternative recommendations, -4°F to 104°F: Refer to Technical; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- l.
- Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
- m.
- Alternative recommendations, 32°F to 122°F: Refer to Technical
- n.
- -31°F to 104°F
- o.
- Alternative recommendations, -4°F to 77°F: Superlube TMS SAE 10W-30
- p.
- Alternative recommendations, 14°F to 104°F: Superlube TMS SAE 15W-40
- q.
- <90°F
- r.
- Alternative recommendations, <122°F: Refer to Technical
- s.
- Mix ratio, 20%
Oil Change Intervals
Engine (DT)
- Months Max
- 3
- Hours Max
- 250
Transmission
- Months Max
- 6
- Hours Max
- 1000
Differential
- Months Max
- 12
- Hours Max
- 2000
Final Drives (each)
- Months Max
- 12
- Hours Max
- 2000
Coolant
- Months Max
- 24
- Hours Max
- 2000
Hydraulics
- Months Max
- 18
- Hours Max
- 3000
Auger & Elevator Lower Bearings & Rollers
- Months Max
- 12
- Hours Max
- 2000
Auger Drive Gear
- Months Max
- 12
- Hours Max
- 2000