Your selected equipment
- Make
- CATERPILLAR
- Model
- 627F
- Engine
- DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
---|---|---|---|---|---|
Engine (DT) (Caterpillar 3306 T) |
Premium
|
Maxtron DEO SAE 15W-40
(a, c, d, e, f, g)
|
9.51 / 7.13
(b)
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transmission |
Premium
|
Maxtron Power Transmission Fluid MV
(h)
|
19.0 / 9.77
(b)
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Differential |
Ultra Premium
|
Maxtron GL 75W-140
|
43.1 / 3.96
(b)
|
||
Premium |
MP Gear Lube SAE 85W-140
|
||||
Final Drives (each) |
Ultra Premium
|
Maxtron GL 75W-140
(i)
|
5.02
|
||
Premium |
MP Gear Lube SAE 85W-140
|
||||
Coolant |
Refer to Technical
|
21.9 / 18.5
(b)
|
|||
Hydraulics |
Indol EH ISO 46
(j, k, l, m, n)
|
37.0
|
|||
Auger Bearings |
Superlube TMS SAE 15W-40
|
0.528
|
|||
Auger Drive Gear |
Ultra Premium
|
Maxtron GL 75W-140
|
5.02
|
||
Premium |
MP Gear Lube SAE 85W-140
|
||||
Wheel Coolant (each) |
Refer to Technical
|
11.9
|
Engine (DT) (Caterpillar 3306 T)
Recommendation:
Premium
Maxtron DEO SAE 15W-40
Mainline
Superlube TMS SAE 15W-40
Capacity 9.51 / 7.13(gal)
(b)
Transmission
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Capacity 19.0 / 9.77(gal)
(b)
Differential
Capacity 43.1 / 3.96(gal)
(b)
Final Drives (each)
Capacity 5.02(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 21.9 / 18.5(gal)
(b)
Auger Drive Gear
Capacity 5.02(gal)
Wheel Coolant (each)
Recommendation:
Ultra Premium
Refer to Technical
Capacity 11.9(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
- b.
- Scraper Transmission, 121 litres
- c.
- Alternative recommendations, -40°F to 50°F: Refer to Technical
- d.
- Alternative recommendations, -22°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
- e.
- Alternative recommendations, -22°F to 86°F: Refer to Technical
- f.
- Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- g.
- Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
- h.
- Transmission oil viscosity options: -30°C to 10°C, 5W-20 (special synthetic oils without VI improvers); -20°C to 10°C, 10W; 0°C to 35°C, 30; 5°C to 45°C, 40; 10°C to 50°C, 50
- i.
- Final drives, differential and wheel bearing oil viscosity options: -30°C to 40°C, 75W-90 (special synthetic oils without VI improvers); -20°C to 0°C, 80W; -20°C to 40°C, 80W-90, -10°C to 50°C, 85W-140; 0°C to 40°C, 90
- j.
- Hydraulic oil viscosity options: -40°C to 40°C, 0W-20 or 0W-30; -30°C to 40°C, 5W-40; -20°C to 40°C, 10W or 10W-30; 10°C to 50°C, 30; -15°C to 50°C, 15W-40
- k.
- 23°F to 113°F
- l.
- Alternative recommendations, -4°F to 104°F: Refer to Technical; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- m.
- Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
- n.
- Alternative recommendations, 32°F to 122°F: Refer to Technical
Oil Change Intervals
Engine (DT) (Caterpillar 3306 T)
- Months Max
- 3
- Hours Max
- 250
Transmission
- Months Max
- 6
- Hours Max
- 1000
Differential
- Months Max
- 12
- Hours Max
- 2000
Final Drives (each)
- Months Max
- 12
- Hours Max
- 2000
Coolant
- Months Max
- 24
- Hours Max
- 2000
Hydraulics
- Months Max
- 18
- Hours Max
- 3000
Auger Bearings
- Months Max
- 12
- Hours Max
- 2000
Auger Drive Gear
- Months Max
- 12
- Hours Max
- 2000