Your selected equipment
- Make
- TEREX
- Model
- PR 600C S/N 60139 & Up (Cold Planers)
- Engine
- DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
---|---|---|---|---|---|
Engine (DT) (Cummins) |
Superlube TMS SAE 15W-40
|
12.0
|
|||
Transmission |
From Hydraulics
|
|
|||
Coolant |
Refer to Technical
|
30.9
|
|||
Hydraulics (Main/Replenishing) |
Ultra Premium
|
Indol Premium Anti-Wear Hydraulic Oil ISO 46
|
35.0 / 10.0
|
||
Premium |
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
|
||||
Mainline |
Indol EH ISO 46
|
||||
Grease |
Ultra Premium
|
Maxtron FS NLGI 2
|
|
||
Premium |
Maxtron EP NLGI 2
|
||||
Mainline |
Blue Gard 500+ NLGI 2
|
||||
Grease Points |
Maxtron EP NLGI 2
|
|
|||
Conveyor Drive |
From Hydraulics
|
|
|||
Cutter Clutch |
Maxtron GL 75W-140
|
0.079
|
|||
Cutter Gearbox |
Maxtron GL 75W-140
|
3.99
|
|||
Track Gearboxes (each) |
Maxtron GL 75W-140
|
1.4
|
Transmission
Recommendation:
From Hydraulics
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 30.9(gal)
Hydraulics (Main/Replenishing)
Recommendation:
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 46
Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
Indol EH ISO 46
Capacity 35.0 / 10.0(gal)
Grease
Recommendation:
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Conveyor Drive
Recommendation:
From Hydraulics
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
There are no notes to display for this model
Oil Change Intervals
Engine (DT) (Cummins)
- Months Max
- 6
- Hours Max
- 625
Coolant
- Hours Max
- 2000
Hydraulics (Main/Replenishing)
- Hours Max
- 2000
Cutter Clutch
- Months Max
- 6
- Hours Max
- 625
Cutter Gearbox
- Months Max
- 12
- Hours Max
- 1500
Track Gearboxes (each)
- Months Max
- 12
- Hours Max
- 1500