Your selected equipment
- Make
- SVEDALA incl. DYNAPAC
- Model
- F 30C/E (Type 725) (Pavers)
- Engine
- DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
---|---|---|---|---|---|
Engine (DT) |
Premium
|
Maxtron DEO SAE 15W-40
|
3.7
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transmission |
From Hydraulics
|
|
|||
Coolant |
Refer to Technical
|
4.49
|
|||
Brake Fluid |
Refer to Technical
|
|
|||
Hydraulics |
Hydrostatic Fluid ISO 46 MV
(a, b, c, d)
|
70.0
|
|||
Grease Points |
Ultra Premium
|
Maxtron FS NLGI 2
|
|
||
Premium |
Maxtron EP NLGI 2
|
||||
Mainline |
Blue Gard 500+ NLGI 2
|
||||
Conveyor Drive (each) |
Refer to Technical
|
0.396
|
|||
Feedscrew Gearbox (each) |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
0.159
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Pump gear |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
1.19
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Track Drive Reducers (each) |
Refer to Technical
|
1.06
|
Engine (DT)
Capacity 3.7(gal)
Transmission
Recommendation:
From Hydraulics
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 4.49(gal)
Brake Fluid
Recommendation:
Ultra Premium
Refer to Technical
Hydraulics
Capacity 70.0(gal)
Grease Points
Recommendation:
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Conveyor Drive (each)
Recommendation:
Ultra Premium
Refer to Technical
Capacity 0.396(gal)
Feedscrew Gearbox (each)
Capacity 0.159(gal)
Pump gear
Capacity 1.19(gal)
Track Drive Reducers (each)
Recommendation:
Ultra Premium
Refer to Technical
Capacity 1.06(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Alternative recommendations, 5°F to 59°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV / Indol Premium Anti-Wear Hydraulic Oil ISO 32
- b.
- Alternative recommendations, 23°F to 77°F: Indol Premium Anti-Wear Hydraulic Oil ISO 46 / Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol EH ISO 46
- c.
- Alternative recommendations, 32°F to 95°F: Hydrostatic Fluid ISO 46 MV
- d.
- Alternative recommendations, 41°F to 113°F: Refer to Technical
Oil Change Intervals
Engine (DT)
- Hours Max
- 250
Coolant
- Months Max
- 24
Hydraulics
- Hours Max
- 1000
Conveyor Drive (each)
- Hours Max
- 1000
Feedscrew Gearbox (each)
- Hours Max
- 1000
Pump gear
- Hours Max
- 500
Track Drive Reducers (each)
- Hours Max
- 1000