Close Print

Maxtron DEO SAE 15W-40

Make
HAMM
Model
H18i Tier4i/Eu Stage3b (Series H233)
Engine
DT
Year
2016-
Application
Recommendation
Capacity (gal)
Engine (DT) (Deutz TCD6.1 L6, DOC+DPF+SCR; 160kW)
Maxtron DEO SAE 15W-40 (a, b, c, d)
4.23
Transmission
From Hydraulics
Rear Axle Differential
Refer to Technical (e)
4.62
Coolant
Refer to Technical (f)
7.4
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV (g)
22.5
Premium
 Hydrostatic Fluid ISO 46 MV
Grease Points
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Drum Gear (Front)
Refer to Technical
2.25
Vibrator (Left/Right - each)
Refer to Technical
0.476

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
>5°F
b.
Alternative recommendations, >-22°F to 86°F: Refer to Technical
c.
Alternative recommendations, >-4°F: Refer to Technical; Maxtron Enviro-Edge SAE 5W-40
d.
Alternative recommendations, >5°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
e.
Alternative recommendations: Refer to Technical
f.
Mix ratio, 40% >-25°C
g.
Alternative recommendations: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV; Hydrostatic Fluid ISO 46 MV; Refer to Technical

Oil Change Intervals

Engine (DT) (Deutz TCD6.1 L6, DOC+DPF+SCR; 160kW)
Hours Max
500
Rear Axle Differential
Hours Max
1000
Coolant
Hours Max
2000
Hydraulics
Hours Max
2000
Drum Gear (Front)
Hours Max
1000
Vibrator (Left/Right - each)
Hours Max
1000