• Search Again
  • Print
  • Send Via Email

Your selected equipment


Make
DITCH WITCH
Model
410SX (Cat 3013C / Perkins 403C-15) (Plows-Pedestrian)
Engine
D

Application
Recommendation
Capacity (gal)
Data Sheet
Sales Sheet
Engine (D)
Ultra Premium
Maxtron Enviro-Edge SAE 5W-40
(a)
1.59
Premium
Maxtron DEO SAE 15W-40
TDS
Mainline
Superlube TMS SAE 15W-40
TDS
Transmission
From Hydraulics
Hydraulics
Ultra Premium
Maxtron THF +
15.9
TDS
Premium
Qwiklift HTB
TDS
Coolant
  (b)
2.3
Grease Points
Ultra Premium
Red Protect XT NLGI 2
Premium
Maxtron FS
Mainline
Molyplex 500+ EP NLGI 2
TDS
Ground Drive Differential
Ultra Premium
Maxtron Enviro-EDGE GL 75W-90
0.555
Premium
MP Gear Lube SAE 80W-90
TDS
Ground Drive Transmission
Ultra Premium
Maxtron Enviro-EDGE GL 75W-90
0.502
Premium
MP Gear Lube SAE 80W-90
TDS
Vibrator
Ultra Premium
Maxtron Enviro-EDGE GL 75W-90
0.291
Premium
MP Gear Lube SAE 80W-90
TDS
Engine (D)
Recommendation:
Ultra Premium Maxtron Enviro-Edge SAE 5W-40
Premium Maxtron DEO SAE 15W-40
Mainline Superlube TMS SAE 15W-40
(a)
Capacity 1.59(gal)
Transmission
Recommendation:
From Hydraulics
Hydraulics
Recommendation:
Ultra Premium Maxtron THF +
Premium Qwiklift HTB
Capacity 15.9(gal)
Coolant
Recommendation:
(b)
Capacity 2.3(gal)
Grease Points
Recommendation:
Ultra Premium Red Protect XT NLGI 2
Premium Maxtron FS
Mainline Molyplex 500+ EP NLGI 2
Ground Drive Differential
Recommendation:
Ultra Premium Maxtron Enviro-EDGE GL 75W-90
Premium MP Gear Lube SAE 80W-90
Capacity 0.555(gal)
Ground Drive Transmission
Recommendation:
Ultra Premium Maxtron Enviro-EDGE GL 75W-90
Premium MP Gear Lube SAE 80W-90
Capacity 0.502(gal)
Vibrator
Recommendation:
Ultra Premium Maxtron Enviro-EDGE GL 75W-90
Premium MP Gear Lube SAE 80W-90
Capacity 0.291(gal)

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations: 14°F to 118°F, Maxtron Enviro-Edge SAE 5W-40 / Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40; -15°F to 68°F, Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30; -40°F to 68°F, CH-4/E5 5W-30
b.
is acceptable for this unit. However, factory fill is John Deere Cool-Gard, an ethylene glycol low silicate heavy duty coolant. Do not mix with other coolants

Oil Change Intervals

Engine (D)
Hours Max
500
Hydraulics
Hours Max
500