Close Print

Maxtron DEO SAE 15W-40

Make
CURBMASTER
Model
CMF, CMOF, CMS, CMSF (Deutz) (Spreader-Finishers)
Engine
D / DT
Application
Recommendation
Capacity (gal)
Engine (D / DT)
Premium
Maxtron DEO SAE 15W-40 (a, b, c, d, e, f, g)
Mainline
Superlube TMS SAE 15W-40
Transfer Box
Indol Premium Anti-Wear Hydraulic Oil ISO 220
Coolant
Refer to Technical
Hydraulics
Hydrostatic Fluid ISO 46 MV
Auger Bearings
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Auger Drive Case
Indol Premium Anti-Wear Hydraulic Oil ISO 220
Chains
Refer to Technical
Drive Gearbox
Indol Premium Anti-Wear Hydraulic Oil ISO 220
Frame Tubes
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Lift Shafts
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
PTO Clutch Housing Bearing
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
PTO Clutch Throwout Bearing
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Screed Transfer Case
Indol Premium Anti-Wear Hydraulic Oil ISO 220
Shaft Bearings
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Transportation Components
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations, -13°F to 86°F: Maxtron Enviro-Edge SAE 5W-40
b.
Alternative recommendations, -13°F to 68°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
c.
Alternative recommendations, -4°F to 77°F: Refer to Technical
d.
Alternative recommendations, >-4°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
e.
Alternative recommendations, 41°F to 86°F: Superlube 518 Diesel Engine Oil SAE 30 / Superlube TMS SAE 10W-30
f.
Alternative recommendations, <77°F: Refer to Technical
g.
Alternative recommendations, >77°F: Superlube TMS SAE 15W-40

Oil Change Intervals

Engine (D / DT)
Hours Max
50
Transfer Box
Hours Max
1000
Coolant
Months Max
12
Hours Max
1000
Hydraulics
Hours Max
500
Auger Drive Case
Hours Max
500
Drive Gearbox
Hours Max
1000
Screed Transfer Case
Hours Max
1000