Close Print

Maxtron DEO SAE 15W-40

Make
CMI CORPORATION
Model
TC2502 (Texturer/Curer)
Engine
D
Application
Recommendation
Capacity (gal)
Engine (D) (Caterpillar)
Premium
Maxtron DEO SAE 15W-40 (a, b)
3.96
Mainline
Superlube TMS SAE 15W-40
Transmission
From Hydraulics
Coolant
Refer to Technical
5.55
Hydraulics
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 46
22.5
Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
Indol EH ISO 46
Hydraulics (Replenishing Tank)
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 46
112
Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
Indol EH ISO 46
Grease Points
Maxtron EP NLGI 2
Grease Points (leg yokes)
Maxtron EP NLGI 2 (c)
Auger Gearbox
Ultra Premium
Maxtron Enviro-EDGE GL 75W-90 (d)
Premium
MP Gear Lube SAE 80W-90
Reduction Hubs (each)
Ultra Premium
Maxtron Enviro-EDGE GL 75W-90 (e)
0.238
Premium
MP Gear Lube SAE 80W-90

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
14°F to 95°F
b.
Alternative recommendations, -31°F to 95°F: Refer to Technical
c.
Manufacturer's recommendation, Refer to Technical
d.
-4°F to 122°F
e.
-4°F to 122°F

Oil Change Intervals

Engine (D) (Caterpillar)
Months Max
3
Hours Max
400
Coolant
Months Max
12
Hours Max
2000
Hydraulics
Months Max
12
Hours Max
1000
Hydraulics (Replenishing Tank)
Months Max
12
Hours Max
2000
Auger Gearbox
Months Max
12
Hours Max
1000
Reduction Hubs (each)
Months Max
12
Hours Max
1000