Close Print

Maxtron DEO SAE 15W-40

Make
CMI CORPORATION
Model
Slipform Paver Autograde (Caterpillar)
Engine
D
Application
Recommendation
Capacity (gal)
Engine (D)
Premium
Maxtron DEO SAE 15W-40 (a, b, c, d, e)
Mainline
Superlube TMS SAE 15W-40
Water Pump
Maxtron EP NLGI 2
Transmission
Refer to Technical
Coolant
Refer to Technical
Hydraulics
Refer to Technical
Grease Points (Couplers (Auxiliary Engine))
Maxtron EP NLGI 2
Grease Points (Couplers (Main Engine))
Maxtron EP NLGI 2
AFT Lubricator Manifolds (Paving Unit)
Ultra Premium
Maxtron EP NLGI 1
Premium
Maxtron FS NLGI 1
Mainline
Red Protect XT NLGI 1
Auger Bearings (Centre & Outboard)
Maxtron EP NLGI 2
Auger Drive Motor Gearboxes
Ultra Premium
Maxtron Enviro-EDGE GL 75W-90
Premium
MP Gear Lube SAE 80W-90
Camming Cylinders (Paving Unit)
Ultra Premium
Maxtron EP NLGI 1 (f)
Premium
Maxtron FS NLGI 1
Mainline
Red Protect XT NLGI 1
Fan & Throttle Shaft Bearings
Maxtron EP NLGI 2
Fittings on Track
Maxtron EP NLGI 2
Oscillating Screed Drive Motor Gearboxes
Ultra Premium
Maxtron Enviro-EDGE GL 75W-90
Premium
MP Gear Lube SAE 80W-90
PTO Shaft
Maxtron EP NLGI 2
Pillow Blocks (Paving Unit)
Ultra Premium
Maxtron EP NLGI 1 (f)
Premium
Maxtron FS NLGI 1
Mainline
Red Protect XT NLGI 1
Pulley Shaft
Maxtron EP NLGI 2
Track Chain Drive Cases
Ultra Premium
Maxtron Enviro-EDGE GL 75W-90
Premium
MP Gear Lube SAE 80W-90

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
b.
Alternative recommendations, -4°F to 50°F: Refer to Technical
c.
Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
d.
Alternative recommendations, 32°F to 104°F: Superlube TMS SAE 10W-30
e.
Alternative recommendations, 41°F to 122°F: Superlube TMS SAE 15W-40
f.
Also recommended, Maxtron FS NLGI 2 / Maxtron EP NLGI 2 / Blue Gard 500+ NLGI 2

Oil Change Intervals

Engine (D)
Months Max
1
Hours Max
250
Transmission
Hours Max
1000
Coolant
Months Max
12
Hours Max
2000
Hydraulics
Months Max
12
Hours Max
1000
Auger Drive Motor Gearboxes
Months Max
12
Hours Max
1000
Oscillating Screed Drive Motor Gearboxes
Hours Max
1000
Track Chain Drive Cases
Hours Max
1000