Your selected equipment
- Make
- WAGNER
- Model
- MT-426 (Deutz F10L/F12L-413FW) (Mine Trucks)
- Engine
- D
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
|---|---|---|---|---|---|
Engine (D) |
Premium
|
Maxtron DEO SAE 15W-40
|
9.11 / 10.7
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transmission |
Ultra Premium
|
Maxtron THF +
|
7.0
|
||
Premium |
Qwiklift HTB
|
||||
Coolant |
AIR
(a)
|
|
|||
Hydraulics |
Refer to Technical
|
53.4
|
|||
Grease Points |
Maxtron EP NLGI 2
|
|
|||
Converter |
Ultra Premium
|
Maxtron THF +
|
3.49
|
||
Premium |
Qwiklift HTB
|
||||
Front & Rear Axle |
Ultra Premium
|
Maxtron GL 75W-140
|
6.5 / 9.25
|
||
Premium |
MP Gear Lube SAE 85W-140
|
||||
Planetaries (each) |
Ultra Premium
|
Maxtron GL 75W-140
|
1.24 / 3.25
|
||
Premium |
MP Gear Lube SAE 85W-140
|
||||
Engine (D)
Capacity 9.11 / 10.7(gal)
Transmission
Capacity 7.0(gal)
Coolant
Recommendation:
AIR
Hydraulics
Recommendation:
Ultra Premium
Refer to Technical
Capacity 53.4(gal)
Converter
Capacity 3.49(gal)
Front & Rear Axle
Capacity 6.5 / 9.25(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Cooling System: Use Ethylene Glycol or Propylene Glycol antifreeze at a ratio of 30%, or one part antifreeze to two parts water. For Detroit Diesel engines 50% Ethylene Glycol antifreeze is recommended but Propylene Glycol is only suitable for the 40, 50 and 60 series, at 30%. Caterpillar recommend that Propylene Glycol should only be used at a ratio of 50%
Oil Change Intervals
Engine (D)
- Hours Max
- 200
Transmission
- Hours Max
- 1000
Hydraulics
- Hours Max
- 1000
Converter
- Hours Max
- 1000
Front & Rear Axle
- Hours Max
- 1000
Planetaries (each)
- Hours Max
- 1000