Close Print

Maxtron DEO SAE 15W-40

Make
THWAITES
Model
Alldrive 4, 5, 6, 7, 9 tonne Powershuttle (4 Wheel Drive Site Dumpers)
Engine
D / DT
Application
Recommendation
Capacity (gal)
Engine (D / DT) (Perkins D3.152/1000 Series)
Premium
 Maxtron DEO SAE 15W-40 (a, b, c, d, e, f)
Mainline
 Superlube TMS SAE 15W-40
Rear Axle (Newage)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
Premium
 MP Gear Lube SAE 80W-90
Transfer Box (Newage)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
Premium
 MP Gear Lube SAE 80W-90
Front Axle (Newage)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
Premium
 MP Gear Lube SAE 80W-90
Brake System
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Premium
 Hydrostatic Fluid ISO 46 MV
Mainline
 Indol Premium Anti-Wear Hydraulic Oil ISO 32
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
10.8 / 18.0
Premium
 Hydrostatic Fluid ISO 46 MV
Mainline
 Indol Premium Anti-Wear Hydraulic Oil ISO 32
Grease Points
Maxtron EP NLGI 2
Powershuttle Transmission (JCB)
Refer to Technical

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
For naturally aspirated engine Refer to Technical is recommended between -15°C to 40°C; Turbo charged engine Superlube TMS SAE 15W-40 is recommended between -10°C to 50°C
b.
14°F to 122°F
c.
Alternative recommendations, -13°F to 68°F: Refer to Technical
d.
Alternative recommendations, 5°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
e.
Alternative recommendations, 23°F to 122°F: Refer to Technical
f.
Alternative recommendations, 32°F to 77°F: Refer to Technical

Oil Change Intervals

Engine (D / DT) (Perkins D3.152/1000 Series)
Hours Max
250
Rear Axle (Newage)
Hours Max
1000
Transfer Box (Newage)
Hours Max
1000
Front Axle (Newage)
Hours Max
1000
Brake System
Hours Max
1000
Hydraulics
Hours Max
2000
Powershuttle Transmission (JCB)
Hours Max
500