Close Print
Make
THWAITES
Model
5, 6, 7, 9 Tonne 200 Series Front Tip (4 Wheel Drive Site Dumpers)
Engine
D / DT
Application
Recommendation
Capacity (gal)
Engine (D / DT)
Refer to Technical (a, b, c, d, e, f, g, h, i)
3.17
Rear Axle
Ultra Premium
 Maxtron THF +
6.6
Premium
 Qwiklift HTB
Transfer Box
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
0.159
Premium
 MP Gear Lube SAE 80W-90
Transmission
Refer to Technical
4.89
Front Axle
Ultra Premium
 Maxtron THF +
6.6
Premium
 Qwiklift HTB
Coolant
Refer to Technical
6.08
Brake System
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
0.079
Premium
 Hydrostatic Fluid ISO 46 MV
Mainline
 Indol Premium Anti-Wear Hydraulic Oil ISO 32
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
19.5
Premium
 Hydrostatic Fluid ISO 46 MV
Mainline
 Indol Premium Anti-Wear Hydraulic Oil ISO 32
Grease Points
Maxtron EP NLGI 2

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
For naturally aspirated engine Refer to Technical is recommended between -15°C to 40°C; Turbo charged engine Superlube TMS SAE 15W-40 is recommended between -10°C to 50°C
b.
Alternative recommendations, -22°F to 32°F: Refer to Technical
c.
Alternative recommendations, -13°F to 68°F: Refer to Technical
d.
Alternative recommendations, 5°F to 104°F: Refer to Technical
e.
Alternative recommendations, 14°F to 122°F: Superlube TMS SAE 15W-40
f.
Alternative recommendations, 23°F to 122°F: Refer to Technical
g.
Alternative recommendations, 32°F to 77°F: Refer to Technical
h.
Alternative recommendations, 41°F to 104°F: Refer to Technical
i.
Alternative recommendations, 59°F to 104°F: Superlube TMS SAE 15W-40

Oil Change Intervals

Engine (D / DT)
Hours Max
100
Rear Axle
Hours Max
1000
Transfer Box
Hours Max
1000
Transmission
Hours Max
1000
Front Axle
Hours Max
1000
Coolant
Hours Max
2000
Brake System
Hours Max
1000
Hydraulics
Hours Max
2000