Your selected equipment
- Make
- TEREX
- Model
- TA5S 4WD Tier4i (Site Dumpers)
- Engine
- DT
- Year
- 2013-
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
---|---|---|---|---|---|
Engine (DT) (Deutz TCD3.6 L4; 70kW) |
Maxtron DEO SAE 15W-40
(a, b)
|
2.38
|
|||
Rear Axle (Dana 112/369) |
Ultra Premium
|
Maxtron THF +
(c)
|
1.85
|
||
Premium |
Qwiklift HTB
|
||||
Transfer Box (ITL; TG300) |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
0.238
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Transmission (ITL SS620) |
Power Transmission Fluid SAE 10W
|
3.43
|
|||
Front Axle (Dana 112/369) |
Ultra Premium
|
Maxtron THF +
(d)
|
1.85
|
||
Premium |
Qwiklift HTB
|
||||
Coolant |
Refer to Technical
(e)
|
3.8
|
|||
Brake system |
Ultra Premium
|
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
|
|
||
Premium |
Hydrostatic Fluid ISO 46 MV
|
||||
Hydraulics |
Ultra Premium
|
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
|
13.2
|
||
Premium |
Hydrostatic Fluid ISO 46 MV
|
||||
Front Axle Hubs (each - Dana 112/369) |
Ultra Premium
|
Maxtron THF +
(f)
|
0.357
|
||
Premium |
Qwiklift HTB
|
||||
All Other Grease Points |
Ultra Premium
|
Maxtron FS NLGI 2
|
|
||
Premium |
Maxtron EP NLGI 2
|
||||
Mainline |
Blue Gard 500+ NLGI 2
|
||||
Bearing & pivot grease |
Ultra Premium
|
Maxtron FS NLGI 2
|
|
||
Premium |
Maxtron EP NLGI 2
|
||||
Mainline |
Blue Gard 500+ NLGI 2
|
||||
Rear Axle Hubs (each - Dana 112/369) |
Ultra Premium
|
Maxtron THF +
(g)
|
0.357
|
||
Premium |
Qwiklift HTB
|
Engine (DT) (Deutz TCD3.6 L4; 70kW)
Capacity 2.38(gal)
Rear Axle (Dana 112/369)
Capacity 1.85(gal)
Transfer Box (ITL; TG300)
Capacity 0.238(gal)
Transmission (ITL SS620)
Capacity 3.43(gal)
Front Axle (Dana 112/369)
Capacity 1.85(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 3.8(gal)
Brake system
Recommendation:
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Premium
Hydrostatic Fluid ISO 46 MV
Hydraulics
Recommendation:
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Premium
Hydrostatic Fluid ISO 46 MV
Capacity 13.2(gal)
Front Axle Hubs (each - Dana 112/369)
Capacity 0.357(gal)
All Other Grease Points
Recommendation:
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Bearing & pivot grease
Recommendation:
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- 5°F to 104°F
- b.
- Alternative recommendations, -4°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
- c.
- Alternative recommendations: Maxtron THF + / Qwiklift HTB
- d.
- Alternative recommendations: Maxtron THF + / Qwiklift HTB
- e.
- Mix ratio, 50% >-34°C
- f.
- Alternative recommendations: Maxtron THF + / Qwiklift HTB
- g.
- Alternative recommendations: Maxtron THF + / Qwiklift HTB
Oil Change Intervals
Engine (DT) (Deutz TCD3.6 L4; 70kW)
- Hours Max
- 500
Rear Axle (Dana 112/369)
- Hours Max
- 500
Transfer Box (ITL; TG300)
- Hours Max
- 500
Transmission (ITL SS620)
- Hours Max
- 1000
Front Axle (Dana 112/369)
- Hours Max
- 500
Coolant
- Hours Max
- 2000
Brake system
- Hours Max
- 500
Hydraulics
- Hours Max
- 1000
Front Axle Hubs (each - Dana 112/369)
- Hours Max
- 500
Rear Axle Hubs (each - Dana 112/369)
- Hours Max
- 500