Your selected equipment
- Make
- TANA
- Model
- G360, G400, G450, G500 (Landfill Compactors)
- Engine
- DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
|---|---|---|---|---|---|
Engine (DT) |
Ultra Premium
|
Maxtron Enviro-Edge SAE 5W-40
(a)
|
11.0
|
||
Premium |
Maxtron DEO SAE 15W-40
|
||||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transmission |
From Hydraulics
|
|
|||
Coolant |
Refer to Technical
|
23.8
|
|||
Hydraulics |
Refer to Technical
(c)
|
52.8 / 74.0
(b)
|
|||
Grease |
Maxtron EP NLGI 2
(d)
|
|
|||
Reduction Gears (each) |
Refer to Technical
|
2.03 / 2.25
(b)
|
|||
Engine (DT)
Recommendation:
Ultra Premium
Maxtron Enviro-Edge SAE 5W-40
Premium
Maxtron DEO SAE 15W-40
Mainline
Superlube TMS SAE 15W-40
Capacity 11.0(gal)
Transmission
Recommendation:
From Hydraulics
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 23.8(gal)
Hydraulics
Recommendation:
Ultra Premium
Refer to Technical
Capacity 52.8 / 74.0(gal)
(b)
Reduction Gears (each)
Recommendation:
Ultra Premium
Refer to Technical
Capacity 2.03 / 2.25(gal)
(b)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- If CH is not available, CD/CE/CF/CG may be used with reduced oil drain interval
- b.
- Refill/total
- c.
- Viscosity ISO VG 10 to 100 according to operating temperature. Acceptable viscosity at operating temperature, 16 to 100 mm2/s. Optimum viscosity, 16 to 36 mm2/s. Maximum start-up viscosity, 1000 mm2/s. Minimum viscosity for short periods, 10 mm2/s
- d.
- Centralised lubrication (where fitted), ML 365 Grease EP NLGI 00
Oil Change Intervals
Engine (DT)
- Hours Max
- 250
Hydraulics
- Hours Max
- 2000
Reduction Gears (each)
- Months Max
- 6
- Hours Max
- 1000