Maxtron DEO SAE 15W-40

Make: CATERPILLAR
Model: D6R Series II
Engine: DT

Application	Recommendation		Capacity (gal)
Engine (DT)	Premium	Maxtron DEO SAE 15W-40 (a, b, c, d, e, f, g)	7.4
Engine (DT)	Mainline	Superlube TMS SAE 15W-40	7.4
Transmission	Premium	Maxtron Power Transmission Fluid MV (h)	39.1
Transmission	Mainline	Power Transmission Fluid SAE 30	39.1
Final Drives (each)	Power Transmission Fluid SAE 50 (i, j, k, l)		3.57
Coolant	Refer to Technical		18.5
Hydraulics	Power Transmission Fluid SAE 10W (m, n, o, p, q)		12.5
Equalizer Bar Bogie Cartridge Pins End Pin Joints	Ultra Premium	Maxtron GL 75W-140
Equalizer Bar Bogie Cartridge Pins End Pin Joints	Premium	MP Gear Lube SAE 85W-140
Rollers & Idlers	Maxtron Enviro-Edge SAE 5W-40 (r, s, t)
Track Roller Frame Pivot Bearings	Power Transmission Fluid SAE 50		1.32
Track Roller Frame Recoil Spring (each)	Power Transmission Fluid SAE 50 (u, v, w, x, y, z, aa)		6.6
Variable Pitch Fan	Maxtron Enviro-Edge SAE 5W-40
Winch (hydraulic drive)	Power Transmission Fluid SAE 10W (bb, cc, dd, ee, ff)		17.8
Winch (mechanical drive)	Premium	Maxtron Power Transmission Fluid MV (gg, hh, ii, jj)	17.8
Winch (mechanical drive)	Mainline	Power Transmission Fluid SAE 30	17.8

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: Alternative recommendations, -40°F to 86°F: Refer to Technical
c.: Alternative recommendations, -40°F to 50°F: Refer to Technical
d.: Alternative recommendations, -22°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
e.: Alternative recommendations, -22°F to 86°F: Refer to Technical
f.: Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
g.: Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
h.: 32°F to 95°F
i.: 5°F to 122°F
j.: Alternative recommendations, -13°F to 77°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
k.: Alternative recommendations, 5°F to 122°F: Refer to Technical
l.: Alternative recommendations, 14°F to 140°F: Refer to Technical
m.: Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
n.: -4°F to 104°F
o.: Alternative recommendations, -4°F to 104°F: Refer to Technical; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
p.: Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
q.: Alternative recommendations, 50°F to 122°F: Refer to Technical
r.: Alternative recommendations, -31°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
s.: Alternative recommendations, -4°F to 77°F: Superlube TMS SAE 10W-30
t.: Alternative recommendations, 14°F to 104°F: Superlube TMS SAE 15W-40
u.: Alternative recommendations, -40°F to 50°F: Refer to Technical
v.: Alternative recommendations, -40°F to 32°F: Refer to Technical
w.: Alternative recommendations, -31°F to 32°F: Refer to Technical
x.: Alternative recommendations, -22°F to 32°F: Power Transmission Fluid SAE 10W
y.: Alternative recommendations, -4°F to 77°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
z.: Alternative recommendations, 14°F to 104°F: Refer to Technical
aa.: Alternative recommendations, 32°F to 122°F: Power Transmission Fluid SAE 50
bb.: Starting Engine Transmission (if fitted) & -22°F to 68°F
cc.: Alternative recommendations, Starting Engine Transmission (if fitted), -40°F to 50°F: Refer to Technical
dd.: Alternative recommendations, Starting Engine Transmission (if fitted), -22°F to 50°F: Refer to Technical
ee.: Alternative recommendations, Starting Engine Transmission (if fitted), 14°F to 50°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
ff.: Alternative recommendations: Refer to Technical
gg.: 32°F to 95°F
hh.: Alternative recommendations, -4°F to 50°F: Power Transmission Fluid SAE 10W
ii.: Alternative recommendations, 32°F to 95°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
jj.: Alternative recommendations, 50°F to 122°F: Power Transmission Fluid SAE 50

Oil Change Intervals

Engine (DT)

Months Max: 1
Hours Max: 250

Transmission

Months Max: 6
Hours Max: 1000

Hydraulics

Months Max: 12
Hours Max: 2000

Winch (mechanical drive)

Hours Max: 1000