Close Print

Maxtron Enviro-Edge SAE 5W-40

Make
VOLVO CONSTRUCTION
Model
L250G (S/N 1001 - 1999) (G Series Wheel loaders MY 2011 - Up)
Engine
DT
Year
2013-
Application
Recommendation
Capacity (gal)
Engine (DT) (Volvo D13F; 290kW)
Maxtron Enviro-Edge SAE 5W-40 (a, b)
13.2
Transmission (HTL307 Optishift)
Refer to Technical (c)
10.8
Coolant
Refer to Technical (d)
12.2
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 46 (e, f)
56.8 - 87.2
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
 Indol EH ISO 46
Grease Points
Ultra Premium
 Maxtron FS NLGI 2 (g)
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Centralised Lubrication System (grease)
Ultra Premium
 Maxtron FS NLGI 2 (h)
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Front Differential & Final Drives
Qwiklift HTB (i, j)
21.4
Rear Axle & Hubs
Qwiklift HTB (k, l)
21.1
Rear Axle Housing (Axle Mounting)
Qwiklift HTB (m, n)
0.793

General Notes

1.
From approximately 2005, Volvo Coolant VCS (yellow) has been specified and depends on the machine Serial Number

Lubricant / Capacity Notes

a.
-4°F to 104°F
b.
Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30; Maxtron Enviro-Edge SAE 5W-40
c.
-22°F to 122°F
d.
Mix ratio, 50% >-35°C
e.
5°F to 86°F
f.
Alternative recommendations, 23°F to 104°F: Hydrostatic Fluid ISO 46 MV
g.
Alternative recommendations: Maxtron EP NLGI 2
h.
Alternative recommendations: Maxtron EP NLGI 2
i.
-22°F to 122°F
j.
Alternative recommendations, -22°F to 122°F: Refer to Technical
k.
-22°F to 122°F
l.
Alternative recommendations, -22°F to 122°F: Refer to Technical
m.
-22°F to 122°F
n.
Alternative recommendations, -22°F to 122°F: Refer to Technical

Oil Change Intervals

Engine (DT) (Volvo D13F; 290kW)
Hours Max
500
Transmission (HTL307 Optishift)
Hours Max
4000
Coolant
Months Max
24
Hydraulics
Hours Max
4000
Front Differential & Final Drives
Hours Max
2000
Rear Axle & Hubs
Hours Max
2000
Rear Axle Housing (Axle Mounting)
Hours Max
2000