Maxtron Enviro-Edge SAE 5W-40

Application	Recommendation		Capacity (gal)
Engine (DT) (Volvo D13E; 245kW)	Maxtron Enviro-Edge SAE 5W-40 (a, b, c)		13.2
Rear Axle (AWB 40B)	Refer to Technical		15.1
Rear Axle (Rear Axle Bridge - Slide Bearings)	Refer to Technical		0.132
Transmission (HTL 222C)	Refer to Technical		11.6
Front Axle (AWB 40B)	Refer to Technical		12.2
Coolant	Refer to Technical (d)		12.2
Hydraulics	Ultra Premium	Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV (e, f, g, h)	39.6
Hydraulics	Premium	Hydrostatic Fluid ISO 46 MV	39.6
Grease Points	Ultra Premium	Maxtron FS NLGI 2 (i)
	Premium	Maxtron EP NLGI 2
	Mainline	Blue Gard 500+ NLGI 2
Centralised Lubrication System (Grease)	Ultra Premium	Maxtron FS NLGI 2 (j)	0.528
	Premium	Maxtron EP NLGI 2
	Mainline	Blue Gard 500+ NLGI 2
Oil Bath (Air Cleaner)	Maxtron Enviro-Edge SAE 5W-40 (k, l, m)		2.38

1.: From approximately 2005, Volvo Coolant VCS (yellow) has been specified and depends on the machine Serial Number

a.: -4°F to 104°F
b.: Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30; Maxtron Enviro-Edge SAE 5W-40
c.: Alternative recommendations, 5°F to 104°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
d.: Mix ratio, 50% >-37°C
e.: 5°F to 86°F
f.: Alternative recommendations, -13°F to 86°F: Refer to Technical
g.: Alternative recommendations, 5°F to 86°F: Refer to Technical
h.: Alternative recommendations, 14°F to 104°F: Refer to Technical
i.: Alternative recommendations: Maxtron EP NLGI 2
j.: Alternative recommendations: Maxtron EP NLGI 2
k.: -4°F to 104°F
l.: Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30; Maxtron Enviro-Edge SAE 5W-40
m.: Alternative recommendations, 5°F to 104°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40