Close Print

Maxtron Enviro-Edge SAE 5W-40

Make
VOLVO CONSTRUCTION
Model
L150H Tier4f/EU Stage4 (H Series Wheel Loaders MY 2014 - Up)
Engine
DT
Year
2015-
Application
Recommendation
Capacity (gal)
Engine (DT) (Volvo D13J 220kW)
Maxtron Enviro-Edge SAE 5W-40 (a, b)
13.2
Rear Axle (Front bridge bearing)
Refer to Technical
Transmission (Volvo HTL 222C)
Refer to Technical (c)
12.7
Axle (Front Volvo AWB 40B)
Refer to Technical (d)
12.2
Axle (Rear Volvo AWB 40C)
Refer to Technical (e)
14.5
Coolant
Refer to Technical (f)
14.5
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 46 (g, h)
41.2
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
 Indol EH ISO 46
Centralised Lubrication System
Maxtron EP NLGI 2 (i, j, k)

General Notes

1.
From approximately 2005, Volvo Coolant VCS (yellow) has been specified and depends on the machine Serial Number

Lubricant / Capacity Notes

a.
-4°F to 104°F
b.
Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30; Maxtron Enviro-Edge SAE 5W-40
c.
-22°F to 122°F
d.
-22°F to 122°F
e.
-22°F to 122°F
f.
Mix ratio, 50% >-35°C
g.
5°F to 86°F
h.
Alternative recommendations, 23°F to 104°F: Hydrostatic Fluid ISO 46 MV
i.
-4°F to 158°F
j.
Alternative recommendations, -4°F to 158°F: Maxtron EP NLGI 2
k.
Alternative recommendations, -4°F to 32°F: Maxtron EP NLGI 1

Oil Change Intervals

Engine (DT) (Volvo D13J 220kW)
Hours Max
500
Rear Axle (Front bridge bearing)
Hours Max
4000
Transmission (Volvo HTL 222C)
Hours Max
4000
Axle (Front Volvo AWB 40B)
Hours Max
2000
Axle (Rear Volvo AWB 40C)
Hours Max
2000
Coolant
Months Max
48
Hours Max
6000
Hydraulics
Hours Max
4000