Close Print

Maxtron DEO SAE 10W-30

Make
VOLVO CONSTRUCTION
Model
L120G Tier4/EU Stage3b (G Series Wheel loaders MY 2011 - Up)
Engine
DT
Application
Recommendation
Capacity (gal)
Engine (DT) (D8H 201kW)
Premium
 Maxtron DEO SAE 10W-30 (a, b, c)
5.81
Mainline
 Superlube TMS SAE 10W-30
Transmission
Refer to Technical (d)
11.9
Coolant
Refer to Technical (e)
11.4
Hydraulics (Tank / System)
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 46 (f, g)
34.6 / 56.8
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
 Indol EH ISO 46
Centralised Lubrication System (Grease)
Maxtron EP NLGI 2
0.528
Front Axle Differential & Reduction Hubs
Qwiklift HTB (h, i)
9.25
Rear Differential & Reduction Hubs
Qwiklift HTB (j, k)
10.0

General Notes

1.
From approximately 2005, Volvo Coolant VCS (yellow) has been specified and depends on the machine Serial Number

Lubricant / Capacity Notes

a.
-4°F to 104°F
b.
Alternative recommendations, -22°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
c.
Alternative recommendations, 5°F to 104°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
d.
-22°F to 122°F
e.
Mix ratio, 50% >-35°C
f.
5°F to 86°F
g.
Alternative recommendations, 23°F to 104°F: Hydrostatic Fluid ISO 46 MV
h.
-22°F to 122°F
i.
Alternative recommendations, -22°F to 122°F: Refer to Technical
j.
-22°F to 122°F
k.
Alternative recommendations, -22°F to 122°F: Refer to Technical

Oil Change Intervals

Engine (DT) (D8H 201kW)
Hours Max
500
Transmission
Hours Max
4000
Coolant
Hours Max
6000
Hydraulics (Tank / System)
Hours Max
4000
Front Axle Differential & Reduction Hubs
Hours Max
1000
Rear Differential & Reduction Hubs
Hours Max
1000