Your selected equipment
- Make
- VOLVO CONSTRUCTION
- Model
- L110G Tier 4i/EU Stage3b (G Series Wheel loaders MY 2011 - Up)
- Engine
- DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
|---|---|---|---|---|---|
Engine (DT) (D8H 190kW) |
Premium
|
Maxtron DEO SAE 10W-30
(a, b, c)
|
5.02
|
||
Mainline |
Superlube TMS SAE 10W-30
|
||||
Transmission |
Refer to Technical
(d)
|
11.9
|
|||
Coolant |
Refer to Technical
(e)
|
11.4
|
|||
Hydraulics (Tank / System) |
Ultra Premium
|
Indol Premium Anti-Wear Hydraulic Oil ISO 46
(f, g)
|
34.6 / 56.8
|
||
Premium |
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
|
||||
Mainline |
Indol EH ISO 46
|
||||
Centralised Lubrication System (Grease) |
Maxtron EP NLGI 2
|
0.528
|
|||
Front Axle Differential & Reduction Hubs |
Qwiklift HTB
(h, i)
|
9.25
|
|||
Rear Differential & Reduction Hubs |
Qwiklift HTB
(j, k)
|
10.0
|
|||
Engine (DT) (D8H 190kW)
Capacity 5.02(gal)
Transmission
Recommendation:
Ultra Premium
Refer to Technical
Capacity 11.9(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 11.4(gal)
Hydraulics (Tank / System)
Recommendation:
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 46
Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
Indol EH ISO 46
Capacity 34.6 / 56.8(gal)
Centralised Lubrication System (Grease)
Capacity 0.528(gal)
Front Axle Differential & Reduction Hubs
Capacity 9.25(gal)
Rear Differential & Reduction Hubs
Capacity 10.0(gal)
General Notes
- 1.
- From approximately 2005, Volvo Coolant VCS (yellow) has been specified and depends on the machine Serial Number
Lubricant / Capacity Notes
- a.
- -4°F to 104°F
- b.
- Alternative recommendations, -22°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
- c.
- Alternative recommendations, 5°F to 104°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
- d.
- -22°F to 122°F
- e.
- Mix ratio, 50% >-35°C
- f.
- 5°F to 86°F
- g.
- Alternative recommendations, 23°F to 104°F: Hydrostatic Fluid ISO 46 MV
- h.
- -22°F to 122°F
- i.
- Alternative recommendations, -22°F to 122°F: Refer to Technical
- j.
- -22°F to 122°F
- k.
- Alternative recommendations, -22°F to 122°F: Refer to Technical
Oil Change Intervals
Engine (DT) (D8H 190kW)
- Hours Max
- 500
Transmission
- Hours Max
- 4000
Coolant
- Hours Max
- 6000
Hydraulics (Tank / System)
- Hours Max
- 4000
Front Axle Differential & Reduction Hubs
- Hours Max
- 1000
Rear Differential & Reduction Hubs
- Hours Max
- 1000