Close Print

Maxtron Enviro-Edge SAE 5W-40

Make
VOLVO CONSTRUCTION
Model
BL60 (Backhoe Loaders)
Engine
DT
Application
Recommendation
Capacity (gal)
Engine (DT) (Volvo D5D CDE3 Turbo 64kW)
Maxtron Enviro-Edge SAE 5W-40 (a, b, c, d)
3.83
Rear Axle (incl hubs)
Qwiklift HTB (e)
3.83
Transmission
Qwiklift HTB (f)
5.28
Front Axle
Qwiklift HTB (g)
1.72
Coolant
Refer to Technical
5.81
Steering System
From Hydraulics
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 46 (h, i)
10.3
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
 Indol EH ISO 46
Front Hubs (each)
Qwiklift HTB (j)
0.211
Grease Points
Ultra Premium
 Maxtron FS NLGI 2 (k, l, m)
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2

General Notes

1.
From approximately 2005, Volvo Coolant VCS (yellow) has been specified and depends on the machine Serial Number

Lubricant / Capacity Notes

a.
-4°F to 113°F
b.
Alternative recommendations, -22°F to 113°F: Maxtron Enviro-Edge SAE 5W-40
c.
Alternative recommendations, <-22°F to 113°F: Refer to Technical
d.
Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
e.
<-22°F to 122°F
f.
<-22°F to >122°F
g.
<-22°F to 122°F
h.
0°F to 86°F
i.
Alternative recommendations, 23°F to 104°F: Hydrostatic Fluid ISO 46 MV
j.
<-22°F to 122°F
k.
-4°F to 68°F
l.
Alternative recommendations, -31°F to 50°F: Maxtron EP NLGI 1 / Maxtron FS NLGI 1 / Red Protect XT NLGI 1
m.
Alternative recommendations, 14°F to 122°F: Refer to Technical

Oil Change Intervals

Engine (DT) (Volvo D5D CDE3 Turbo 64kW)
Hours Max
500
Rear Axle (incl hubs)
Hours Max
1000
Transmission
Hours Max
1000
Front Axle
Hours Max
1000
Coolant
Hours Max
6000
Hydraulics
Hours Max
1000
Front Hubs (each)
Hours Max
1000