• Search Again
  • Print
  • Send Via Email

Your selected equipment


Make
NEW HOLLAND CONSTRUCTION
Model
W50 TC (Compact Wheeled Loaders)
Engine
D / DT

Application
Recommendation
Capacity (gal)
Data Sheet
Sales Sheet
Engine (D / DT)
Premium
Maxtron DEO SAE 15W-40
3.17
PDS
Mainline
Superlube TMS SAE 15W-40
PDS
Rear Axle (High-speed axle)
Refer to Technical
2.11
Rear Axle (Standard Axle - each)
Refer to Technical
2.11
Transmission
From Hydraulics
Front Axle (High-speed axle)
Refer to Technical
2.11
Front Axle (Standard Axle - each)
Refer to Technical
2.11
Coolant
AIR
Hydraulics
Hydrostatic Fluid ISO 46 MV
(a, b, c)
17.2
PDS
Grease Points
Ultra Premium
Maxtron EP NLGI 1
Premium
Maxtron EP NLGI 2
PDS
Distributor Gearbox (High-speed axle)
Refer to Technical
2.11
Reduction Hubs (each) (High-speed axle)
Refer to Technical
0.185
Reduction Hubs (each) (Standard Axle - each)
Refer to Technical
0.185
Engine (D / DT)
Recommendation:
Premium Maxtron DEO SAE 15W-40
Mainline Superlube TMS SAE 15W-40
Capacity 3.17(gal)
Rear Axle (High-speed axle)
Recommendation:
Ultra Premium Refer to Technical
Capacity 2.11(gal)
Rear Axle (Standard Axle - each)
Recommendation:
Ultra Premium Refer to Technical
Capacity 2.11(gal)
Transmission
Recommendation:
From Hydraulics
Front Axle (High-speed axle)
Recommendation:
Ultra Premium Refer to Technical
Capacity 2.11(gal)
Front Axle (Standard Axle - each)
Recommendation:
Ultra Premium Refer to Technical
Capacity 2.11(gal)
Coolant
Recommendation:
AIR
Hydraulics
Recommendation:
Ultra Premium Hydrostatic Fluid ISO 46 MV
(a, b, c)
Capacity 17.2(gal)
Grease Points
Recommendation:
Ultra Premium Maxtron EP NLGI 1
Premium Maxtron EP NLGI 2
Distributor Gearbox (High-speed axle)
Recommendation:
Ultra Premium Refer to Technical
Capacity 2.11(gal)
Reduction Hubs (each) (High-speed axle)
Recommendation:
Ultra Premium Refer to Technical
Capacity 0.185(gal)
Reduction Hubs (each) (Standard Axle - each)
Recommendation:
Ultra Premium Refer to Technical
Capacity 0.185(gal)

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations, -22°F to 104°F: Refer to Technical
b.
Alternative recommendations, -4°F to 104°F: Hydrostatic Fluid ISO 46 MV
c.
Alternative recommendations, 32°F to 122°F: Indol Premium Anti-Wear Hydraulic Oil ISO 68

Oil Change Intervals

Engine (D / DT)
Hours Max
1000
Rear Axle (High-speed axle)
Hours Max
1000
Rear Axle (Standard Axle - each)
Hours Max
1000
Front Axle (High-speed axle)
Hours Max
1000
Front Axle (Standard Axle - each)
Hours Max
1000
Hydraulics
Hours Max
3000
Distributor Gearbox (High-speed axle)
Hours Max
1000
Reduction Hubs (each) (High-speed axle)
Hours Max
1000
Reduction Hubs (each) (Standard Axle - each)
Hours Max
1000