Maxtron Enviro-Edge SAE 5W-40

Application	Recommendation		Capacity (gal)
Engine (DT) (SAA6D140E-5, EGR)	Maxtron Enviro-Edge SAE 5W-40 (a, b, c, d)		11.9
Rear Axle	Ultra Premium	Maxtron THF + (e, f)	21.4
Rear Axle	Premium	Qwiklift HTB	21.4
Transmission (Case)	Premium	Maxtron Power Transmission Fluid MV (g, h, i)	20.1
Transmission (Case)	Mainline	Power Transmission Fluid SAE 30	20.1
Front Axle	Ultra Premium	Maxtron THF + (e, j)	23.0
Front Axle	Premium	Qwiklift HTB	23.0
Coolant	Refer to Technical		31.7
Hydraulics	Power Transmission Fluid SAE 10W (k, l, m, n)		89.0 - 122
All Grease Points	Ultra Premium	Maxtron FS NLGI 2
	Premium	Maxtron EP NLGI 2
	Mainline	Blue Gard 500+ NLGI 2

There are no notes to display for this model

a.: Alternative recommendations, HTHS > 3.5 mPa-S, -22°F to 86°F: Refer to Technical
b.: Alternative recommendations, HTHS > 3.5 mPa-S, -13°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
c.: Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
d.: Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
e.: Where ambients are higher than 45°C, & machines operate longer than 12 hours/day, the use of CD 50 or TF CAT TO4 50 is preferred. Squeaking of brakes may occur but will not affect performance or durability
f.: -22°F to 113°F
g.: 32°F to 122°F
h.: Alternative recommendations, -22°F to 50°F: Refer to Technical
i.: Alternative recommendations, 32°F to 122°F: Refer to Technical
j.: -22°F to 113°F
k.: -4°F to 104°F
l.: Alternative recommendations, -4°F to 122°F: Indol Premium Anti-Wear Hydraulic Oil ISO 46 / Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol EH ISO 46; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
m.: Alternative recommendations, -4°F to 104°F: Refer to Technical
n.: Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40