Your selected equipment
- Make
- KAWASAKI
- Model
- 80ZIII (Wheeled Loaders)
- Engine
- DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
|---|---|---|---|---|---|
Engine (DT) (Cummins 6CT8.3) |
Premium
|
Maxtron DEO SAE 15W-40
|
6.6
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transmission |
(a) |
9.19
|
|||
Coolant |
Refer to Technical
|
14.5
|
|||
Brake System |
Refer to Technical
|
0.343 / 0.581
|
|||
Steering Box |
Refer to Technical
|
0.106
|
|||
Hydraulics |
Ultra Premium
|
Indol Premium Anti-Wear Hydraulic Oil ISO 46
(b, c, d)
|
38.0
|
||
Premium |
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
|
||||
Mainline |
Indol EH ISO 46
|
||||
Grease Points |
Maxtron EP NLGI 2
(e, f)
|
|
|||
Front Axle incl Reduction Hubs (each) |
Refer to Technical
|
14.5
|
|||
Rear Differential & Reduction Hubs |
Refer to Technical
|
14.5
|
|||
Engine (DT) (Cummins 6CT8.3)
Capacity 6.6(gal)
Transmission
Recommendation:
(a)
Capacity 9.19(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 14.5(gal)
Brake System
Recommendation:
Ultra Premium
Refer to Technical
Capacity 0.343 / 0.581(gal)
Steering Box
Recommendation:
Ultra Premium
Refer to Technical
Capacity 0.106(gal)
Hydraulics
Recommendation:
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 46
Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
Indol EH ISO 46
Capacity 38.0(gal)
Front Axle incl Reduction Hubs (each)
Recommendation:
Ultra Premium
Refer to Technical
Capacity 14.5(gal)
Rear Differential & Reduction Hubs
Recommendation:
Ultra Premium
Refer to Technical
Capacity 14.5(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Primary recommendation: Transmission (inc torque converter): Refer to Technical. Superlube 518 Diesel Engine Oil SAE 10W or Maxtron Multi- Vehicle ATF Low Vis / Auto Gold Multi-Vehicle ATF / Maxtron ATF SS8 is also acceptable
- b.
- Alternative recommendations, 0°F to 86°F: Indol Premium Anti-Wear Hydraulic Oil ISO 46 / Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol EH ISO 46
- c.
- Alternative recommendations, <32°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV / Indol Premium Anti-Wear Hydraulic Oil ISO 32
- d.
- Alternative recommendations, >86°F: Refer to Technical
- e.
- Alternative recommendations, <14°F: Maxtron EP NLGI 1
- f.
- Alternative recommendations, >14°F: Maxtron EP NLGI 2
Oil Change Intervals
Engine (DT) (Cummins 6CT8.3)
- Hours Max
- 250
Coolant
- Months Max
- 24
- Hours Max
- 3000
Hydraulics
- Hours Max
- 2000