Close Print

Maxtron DEO SAE 15W-40

Make
CATERPILLAR
Model
IT28B (Integrated Toolcarriers)
Engine
D
Application
Recommendation
Capacity (gal)
Engine (D)
Premium
 Maxtron DEO SAE 15W-40 (a)
3.7
Mainline
 Superlube TMS SAE 15W-40
Rear Axle
Power Transmission Fluid SAE 50
6.6
Transmission
Premium
 Maxtron Power Transmission Fluid MV
7.93
Mainline
 Power Transmission Fluid SAE 30
Front Axle
Power Transmission Fluid SAE 50
6.6
Coolant
Refer to Technical
7.13
Hydraulics
Indol EH ISO 46 (b, c, d, e, f)
12.7 - 24.0
Grease Points (high temperature)
Poly-Xtreme NLGI 2
Grease Points (Multipurpose Lithium Greases)
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Grease Points (Molybdenum)
Maxtron EP NLGI 2

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.
Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
c.
23°F to 113°F
d.
Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
e.
Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
f.
Alternative recommendations, 32°F to 122°F: Refer to Technical

Oil Change Intervals

Engine (D)
Months Max
1
Hours Max
250
Rear Axle
Months Max
12
Hours Max
2000
Transmission
Months Max
6
Hours Max
1000
Front Axle
Months Max
12
Hours Max
2000
Coolant
Months Max
12
Hours Max
2000
Hydraulics
Months Max
18
Hours Max
3000