Close Print

Maxtron DEO SAE 15W-40

Make
CATERPILLAR
Model
933C (Track Type Loaders)
Engine
D / DT
Application
Recommendation
Capacity (gal)
Engine (D / DT)
Premium
 Maxtron DEO SAE 15W-40 (a)
3.43
Mainline
 Superlube TMS SAE 15W-40
Transmission
From Hydraulics
Coolant
Refer to Technical
5.55
Hydraulics
Indol EH ISO 46 (b, c, d, e, f)
15.1
Final Drives (LGP, each)
Power Transmission Fluid SAE 50
5.42
Final Drives (standard, each)
Power Transmission Fluid SAE 50
3.65
Track Rollers & Idlers
Superlube TMS SAE 10W-30

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.
Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
c.
23°F to 113°F
d.
Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
e.
Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
f.
Alternative recommendations, 32°F to 122°F: Refer to Technical

Oil Change Intervals

Engine (D / DT)
Months Max
1
Hours Max
250
Coolant
Months Max
12
Hours Max
2000
Hydraulics
Months Max
18
Hours Max
3000
Final Drives (LGP, each)
Months Max
6
Hours Max
1000
Final Drives (standard, each)
Months Max
6
Hours Max
1000