• Search Again
  • Print
  • Send Via Email

Your selected equipment


Make
CATERPILLAR
Model
933C (Track Type Loaders)
Engine
D / DT

Application
Recommendation
Capacity (gal)
Data Sheet
Sales Sheet
Engine (D / DT)
Premium
Maxtron DEO SAE 15W-40
(a)
3.43
PDS
Mainline
Superlube TMS SAE 15W-40
PDS
Transmission
From Hydraulics
Coolant
Refer to Technical
5.55
Hydraulics
Indol EH ISO 46
(b, c, d, e, f)
15.1
PDS
Final Drives (LGP, each)
Power Transmission Fluid SAE 50
5.42
PDS
Final Drives (standard, each)
Power Transmission Fluid SAE 50
3.65
PDS
Track Rollers & Idlers
Superlube TMS SAE 10W-30
PDS
Engine (D / DT)
Recommendation:
Premium Maxtron DEO SAE 15W-40
Mainline Superlube TMS SAE 15W-40
(a)
Capacity 3.43(gal)
Transmission
Recommendation:
From Hydraulics
Coolant
Recommendation:
Ultra Premium Refer to Technical
Capacity 5.55(gal)
Hydraulics
Recommendation:
Mainline Indol EH ISO 46
(b, c, d, e, f)
Capacity 15.1(gal)
Final Drives (LGP, each)
Recommendation:
Mainline Power Transmission Fluid SAE 50
Capacity 5.42(gal)
Final Drives (standard, each)
Recommendation:
Mainline Power Transmission Fluid SAE 50
Capacity 3.65(gal)
Track Rollers & Idlers
Recommendation:
Mainline Superlube TMS SAE 10W-30

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.
Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
c.
23°F to 113°F
d.
Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
e.
Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
f.
Alternative recommendations, 32°F to 122°F: Refer to Technical

Oil Change Intervals

Engine (D / DT)
Months Max
1
Hours Max
250
Coolant
Months Max
12
Hours Max
2000
Hydraulics
Months Max
18
Hours Max
3000
Final Drives (LGP, each)
Months Max
6
Hours Max
1000
Final Drives (standard, each)
Months Max
6
Hours Max
1000