Close Print

Maxtron DEO SAE 15W-40

Make
CATERPILLAR
Model
906 (Wheeled Loaders)
Engine
D / DT
Application
Recommendation
Capacity (gal)
Engine (D / DT)
Premium
 Maxtron DEO SAE 15W-40 (a)
1.85
Mainline
 Superlube TMS SAE 15W-40
Transmission
From Hydraulics
Differentials
Refer to Technical (b, c, d)
2.11
Final Drives (each)
Refer to Technical (e, f, g)
0.185
Coolant
Refer to Technical
3.7
Hydraulics
Indol EH ISO 46 (h, i, j, k, l)
12.9
Grease Points (Molybdenum)
Maxtron EP NLGI 2
Grease Points (Multipurpose Lithium Greases)
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Grease Points (special purpose high temperature anti friction bearings)
Poly-Xtreme NLGI 2
Hydrostatic Drive Gearbox
Refer to Technical (m, n, o)
0.317

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.
Alternative recommendations, -4°F to 122°F: Refer to Technical
c.
Alternative recommendations, -4°F to 104°F: Refer to Technical
d.
Alternative recommendations, 14°F to 104°F: Refer to Technical
e.
Alternative recommendations, -4°F to 122°F: Refer to Technical
f.
Alternative recommendations, -4°F to 104°F: Refer to Technical
g.
Alternative recommendations, 14°F to 104°F: Refer to Technical
h.
Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
i.
23°F to 113°F
j.
Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
k.
Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
l.
Alternative recommendations, 32°F to 122°F: Refer to Technical
m.
Alternative recommendations, -4°F to 122°F: Refer to Technical
n.
Alternative recommendations, -4°F to 104°F: Refer to Technical
o.
Alternative recommendations, 14°F to 104°F: Refer to Technical

Oil Change Intervals

Engine (D / DT)
Hours Max
250
Differentials
Months Max
6
Hours Max
1000
Final Drives (each)
Months Max
6
Hours Max
1000
Coolant
Months Max
12
Hours Max
2000
Hydraulics
Months Max
18
Hours Max
3000
Hydrostatic Drive Gearbox
Hours Max
1000