Close Print

Maxtron Enviro-Edge SAE 5W-40

Make
CATERPILLAR
Model
430E (S/N PRA00001 - Up) (Backhoe Loaders)
Engine
DT
Application
Recommendation
Capacity (gal)
Engine (DT) (Caterpillar C4.4 ACERT Tier3 Euro3A 82kW)
Maxtron Enviro-Edge SAE 5W-40 (a, b, c, d)
1.9
Rear Axle
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90 (e, f, g)
4.36
Premium
 MP Gear Lube SAE 80W-90
Transmission (Powershift)
Premium
 Maxtron Power Transmission Fluid MV (h, i, j, k, l)
4.89
Mainline
 Power Transmission Fluid SAE 30
Transmission
From Hydraulics
Front Differential (4WD if fitted)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90 (m)
2.91
Premium
 MP Gear Lube SAE 80W-90
Coolant
Refer to Technical
5.15 - 5.68
Hydraulics
Indol EH ISO 46 (n, o, p, q, r)
10.6
Front Powered Axle Final Drives (each)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90 (s)
0.185
Premium
 MP Gear Lube SAE 80W-90
Rear Reduction Hubs (each)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90 (t)
0.449
Premium
 MP Gear Lube SAE 80W-90

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.
-4°F to 122°F
c.
Alternative recommendations, -40°F to 104°F: Refer to Technical
d.
Alternative recommendations, -22°F to 122°F: Maxtron Enviro-Edge SAE 5W-40
e.
Use 197-0017 axle & brake oil additive as directed.
f.
B, C & D Series & 400E Series, Fixed rear axle: refer to operator's manual for recommendations & additive type and volume.
g.
-4°F to 104°F
h.
32°F to 95°F
i.
Alternative recommendations, -4°F to 50°F: Power Transmission Fluid SAE 10W
j.
Alternative recommendations, 5°F to 109°F: Maxtron Power Transmission Fluid MV
k.
Alternative recommendations, 32°F to 95°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
l.
Alternative recommendations, 50°F to 122°F: Power Transmission Fluid SAE 50
m.
-4°F to 104°F
n.
Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
o.
23°F to 113°F
p.
Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
q.
Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
r.
Alternative recommendations, 32°F to 122°F: Refer to Technical
s.
-4°F to 104°F
t.
-4°F to 104°F

Oil Change Intervals

Engine (DT) (Caterpillar C4.4 ACERT Tier3 Euro3A 82kW)
Months Max
3
Hours Max
500
Rear Axle
Months Max
6
Hours Max
1000
Transmission (Powershift)
Months Max
6
Hours Max
1000
Front Differential (4WD if fitted)
Months Max
6
Hours Max
1000
Coolant
Months Max
72
Hours Max
12000
Hydraulics
Months Max
18
Hours Max
3000
Front Powered Axle Final Drives (each)
Months Max
6
Hours Max
1000
Rear Reduction Hubs (each)
Months Max
6
Hours Max
1000