Your selected equipment
- Make
- CATERPILLAR
- Model
- 430E (S/N PRA00001 - Up) (Backhoe Loaders)
- Engine
- DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
|---|---|---|---|---|---|
Engine (DT) (Caterpillar C4.4 ACERT Tier3 Euro3A 82kW) |
Maxtron Enviro-Edge SAE 5W-40
(a, b, c, d)
|
1.9
|
|||
Rear Axle |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
(e, f, g)
|
4.36
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Transmission (Powershift) |
Premium
|
Maxtron Power Transmission Fluid MV
(h, i, j, k, l)
|
4.89
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Transmission |
From Hydraulics
|
|
|||
Front Differential (4WD if fitted) |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
(m)
|
2.91
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Coolant |
Refer to Technical
|
5.15 - 5.68
|
|||
Hydraulics |
Indol EH ISO 46
(n, o, p, q, r)
|
10.6
|
|||
Front Powered Axle Final Drives (each) |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
(s)
|
0.185
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Rear Reduction Hubs (each) |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
(t)
|
0.449
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Engine (DT) (Caterpillar C4.4 ACERT Tier3 Euro3A 82kW)
Capacity 1.9(gal)
Rear Axle
Recommendation:
Ultra Premium
Maxtron Enviro-EDGE GL 75W-90
Premium
MP Gear Lube SAE 80W-90
Capacity 4.36(gal)
Transmission (Powershift)
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Capacity 4.89(gal)
Transmission
Recommendation:
From Hydraulics
Front Differential (4WD if fitted)
Capacity 2.91(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 5.15 - 5.68(gal)
Front Powered Axle Final Drives (each)
Capacity 0.185(gal)
Rear Reduction Hubs (each)
Capacity 0.449(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
- b.
- -4°F to 122°F
- c.
- Alternative recommendations, -40°F to 104°F: Refer to Technical
- d.
- Alternative recommendations, -22°F to 122°F: Maxtron Enviro-Edge SAE 5W-40
- e.
- Use 197-0017 axle & brake oil additive as directed.
- f.
- B, C & D Series & 400E Series, Fixed rear axle: refer to operator's manual for recommendations & additive type and volume.
- g.
- -4°F to 104°F
- h.
- 32°F to 95°F
- i.
- Alternative recommendations, -4°F to 50°F: Power Transmission Fluid SAE 10W
- j.
- Alternative recommendations, 5°F to 109°F: Maxtron Power Transmission Fluid MV
- k.
- Alternative recommendations, 32°F to 95°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
- l.
- Alternative recommendations, 50°F to 122°F: Power Transmission Fluid SAE 50
- m.
- -4°F to 104°F
- n.
- Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
- o.
- 23°F to 113°F
- p.
- Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- q.
- Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
- r.
- Alternative recommendations, 32°F to 122°F: Refer to Technical
- s.
- -4°F to 104°F
- t.
- -4°F to 104°F
Oil Change Intervals
Engine (DT) (Caterpillar C4.4 ACERT Tier3 Euro3A 82kW)
- Months Max
- 3
- Hours Max
- 500
Rear Axle
- Months Max
- 6
- Hours Max
- 1000
Transmission (Powershift)
- Months Max
- 6
- Hours Max
- 1000
Front Differential (4WD if fitted)
- Months Max
- 6
- Hours Max
- 1000
Coolant
- Months Max
- 72
- Hours Max
- 12000
Hydraulics
- Months Max
- 18
- Hours Max
- 3000
Front Powered Axle Final Drives (each)
- Months Max
- 6
- Hours Max
- 1000
Rear Reduction Hubs (each)
- Months Max
- 6
- Hours Max
- 1000