Close Print

Maxtron DEO SAE 15W-40

Make
CATERPILLAR
Model
426B (Backhoe Loaders)
Engine
DT
Application
Recommendation
Capacity (gal)
Engine (DT)
Premium
 Maxtron DEO SAE 15W-40 (a)
2.22
Mainline
 Superlube TMS SAE 15W-40
Rear Axle
Ultra Premium
 Maxtron THF +
4.89
Premium
 Qwiklift HTB
Transmission
Premium
 Maxtron Power Transmission Fluid MV
2.64
Mainline
 Power Transmission Fluid SAE 30
Front Axle
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
1.98
Premium
 MP Gear Lube SAE 80W-90
Coolant
Refer to Technical
2.91 - 4.76
Hydraulics
Indol EH ISO 46 (b, c, d, e, f)
10.0
Grease Points (Molybdenum)
Maxtron EP NLGI 2
Grease Points (Multipurpose Lithium Greases)
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Grease Points (special purpose high temperature anti friction bearings)
Poly-Xtreme NLGI 2

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.
Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
c.
23°F to 113°F
d.
Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
e.
Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
f.
Alternative recommendations, 32°F to 122°F: Refer to Technical

Oil Change Intervals

Engine (DT)
Months Max
1
Hours Max
250
Rear Axle
Months Max
6
Hours Max
1000
Transmission
Months Max
6
Hours Max
1000
Front Axle
Months Max
6
Hours Max
1000
Coolant
Months Max
12
Hours Max
2000
Hydraulics
Months Max
18
Hours Max
3000