Your selected equipment
- Make
- CATERPILLAR
- Model
- 267 (Multi Terrain Loaders)
- Engine
- D / DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
---|---|---|---|---|---|
Engine (D / DT) |
Premium
|
Maxtron DEO SAE 15W-40
(a)
|
2.11 - 2.38
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transmission |
From Hydraulics
|
|
|||
Coolant |
Refer to Technical
|
2.64
|
|||
Hydraulics |
Refer to Technical
(b, c, d, e, f, g)
|
9.25
|
|||
External Grease Points |
Maxtron EP NLGI 2
|
|
|||
Idler & Bogie Wheel Tubes |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
0.053
|
||
Premium |
MP Gear Lube SAE 80W-90
|
Engine (D / DT)
Capacity 2.11 - 2.38(gal)
Transmission
Recommendation:
From Hydraulics
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 2.64(gal)
Hydraulics
Recommendation:
Ultra Premium
Refer to Technical
Capacity 9.25(gal)
Idler & Bogie Wheel Tubes
Capacity 0.053(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
- b.
- Also recommended, Maxtron THF + / Qwiklift HTB / Power Transmission Fluid SAE 30
- c.
- -4°F to 104°F
- d.
- Alternative recommendations, -4°F to 104°F: Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- e.
- Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
- f.
- Alternative recommendations, 23°F to 113°F: Indol EH ISO 46
- g.
- Alternative recommendations, 32°F to 122°F: Refer to Technical
Oil Change Intervals
Engine (D / DT)
- Months Max
- 1
- Hours Max
- 250
Coolant
- Months Max
- 12
- Hours Max
- 2000
Hydraulics
- Months Max
- 18
- Hours Max
- 3000