Close Print

Maxtron Enviro-Edge SAE 5W-40

Make: CASE CE
Model: 580ST (4WD) (Backhoe Loaders)
Engine: D / DT

Application	Recommendation		Capacity (gal)
Engine (D / DT) (Case 434T/E 72kW)	Maxtron Enviro-Edge SAE 5W-40		2.11
Rear Axle	Refer to Technical (a)		2.91
Transmission (Powershift)	Ultra Premium	Maxtron THF + (b)	5.55
Transmission (Powershift)	Premium	Qwiklift HTB	5.55
Front Axle	Refer to Technical (a)		2.77
Coolant	Refer to Technical		6.34
Hydraulics	Ultra Premium	Maxtron THF +	31.2
Hydraulics	Premium	Qwiklift HTB	31.2
Grease Points	Maxtron EP NLGI 2
Front Final Drives	Refer to Technical		0.343
Powershuttle Transmission	Ultra Premium	Maxtron THF + (c)	5.5
Powershuttle Transmission	Premium	Qwiklift HTB	5.5
Reduction Hubs (each)	Refer to Technical		0.343
Telescopic Arm Lubrication	Maxtron EP NLGI 2

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.: 2WS models as from Jan 2006 & serial number N6GH04458. Rear axles to use Akcela Hy-Tran Ultra plus Axle Oil Additive (AOA). Front axles to use Akcela Hy-Tran Ultra WITHOUT AOA. Affected machines will be identified by a decal on the LH side of the main chassis.
b.: -22°F to 122°F
c.: -22°F to 122°F

Oil Change Intervals

Engine (D / DT) (Case 434T/E 72kW)

Hours Max: 500

Rear Axle

Hours Max: 1000

Transmission (Powershift)

Hours Max: 1000

Front Axle

Hours Max: 1000

Coolant

Months Max: 12
Hours Max: 2000

Hydraulics

Hours Max: 2000

Front Final Drives

Hours Max: 1000

Powershuttle Transmission

Months Max: 6
Hours Max: 1000

Reduction Hubs (each)

Hours Max: 1000