Close Print

Maxtron Enviro-Edge SAE 5W-40

Make
LINDE incl. BAKER
Model
H80-900D, 8ton (396 Series)
Engine
DT
Year
2010-
Application
Recommendation
Capacity (gal)
Engine (DT) (Deutz TCD2012, 4.0l, 4-cyl; 87kW)
Maxtron Enviro-Edge SAE 5W-40 (a, b, c, d)
3.43
Transmission
From Hydraulics
Coolant (without/with Heating & Control system)
Refer to Technical (e)
3.7 / 4.36
Hydraulics
Ultra Premium
 Hydrostatic Fluid ISO 46 MV (f)
22.7 - 29.1
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 68
Mainline
 Vacuum Pump Oil (ISO 68)
Grease Points
Maxtron EP NLGI 2 (g)
Final Drive Gears (each)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90 (h)
0.396
Premium
 MP Gear Lube SAE 80W-90

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
-4°F to 104°F
b.
Alternative recommendations, -22°F to 86°F: Refer to Technical
c.
Alternative recommendations, -4°F to 104°F: Refer to Technical
d.
Alternative recommendations, -4°F to 86°F: Refer to Technical
e.
Mix ratio, 40% >-25°C
f.
Alternative recommendations: Indol Premium Anti-Wear Hydraulic Oil ISO 100; Hydrostatic Fluid ISO 46 MV; Refer to Technical
g.
Alternative recommendations: Blue Gard 500+ NLGI 2 / Maxtron EP NLGI 2 / Maxtron EP NLGI 1
h.
Alternative recommendations: Maxtron Enviro-EDGE GL 75W-90 / MP Gear Lube SAE 80W-90

Oil Change Intervals

Engine (DT) (Deutz TCD2012, 4.0l, 4-cyl; 87kW)
Months Max
12
Hours Max
1000
Coolant (without/with Heating & Control system)
Months Max
24
Hours Max
6000
Hydraulics
Hours Max
6000
Final Drive Gears (each)
Hours Max
3000