Maxtron DEO SAE 15W-40

Application	Recommendation		Capacity (gal)
Engine (DT) (Sisu 66ETA)	Premium	Maxtron DEO SAE 15W-40	2.64
Engine (DT) (Sisu 66ETA)	Mainline	Superlube TMS SAE 15W-40	2.64
Transfer Gearbox	Ultra Premium	Maxtron Enviro-EDGE GL 75W-90	1.19
Transfer Gearbox	Premium	MP Gear Lube SAE 80W-90	1.19
Transmission	From Hydraulics
Front Differential	Ultra Premium	Maxtron Enviro-EDGE GL 75W-90	2.38
Front Differential	Premium	MP Gear Lube SAE 80W-90	2.38
Coolant	Refer to Technical		9.51
Hydraulics	Ultra Premium	Indol Premium Anti-Wear Hydraulic Oil ISO 46 (a, b, c, d)	76.6
	Premium	Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
	Mainline	Indol EH ISO 46
Grease Points	(e)
Bogie Housing (each)	Ultra Premium	Maxtron Enviro-EDGE GL 75W-90	7.53
Bogie Housing (each)	Premium	MP Gear Lube SAE 80W-90	7.53
Crane Slew Motor	Ultra Premium	Maxtron Enviro-EDGE GL 75W-90	1.19
Crane Slew Motor	Premium	MP Gear Lube SAE 80W-90	1.19
Front Axle Differential & Reduction Hubs	Ultra Premium	Maxtron Enviro-EDGE GL 75W-90	8.45
Front Axle Differential & Reduction Hubs	Premium	MP Gear Lube SAE 80W-90	8.45
Rear Differential & Reduction Hubs	Ultra Premium	Maxtron Enviro-EDGE GL 75W-90	8.45
Rear Differential & Reduction Hubs	Premium	MP Gear Lube SAE 80W-90	8.45
Toothed Ring	Refer to Technical

There are no notes to display for this model

a.: Alternative recommendations, -13°F to 167°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
b.: Alternative recommendations, -4°F to 194°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV
c.: Alternative recommendations, 14°F to 194°F: Indol Premium Anti-Wear Hydraulic Oil ISO 46 / Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol EH ISO 46
d.: Alternative recommendations, 32°F to 194°F: Hydrostatic Fluid ISO 46 MV
e.: Grease Points: manufacturer recommends grease with a temperature range of -30°C to 110°C with penetration of 265-295 MM/10, NLGI 2