Close Print

Maxtron DEO SAE 15W-40

Make
VALMET
Model
840.2 (Forwarders)
Engine
DT
Application
Recommendation
Capacity (gal)
Engine (DT) (SISU 66ETA 125kW)
Premium
 Maxtron DEO SAE 15W-40
6.34
Mainline
 Superlube TMS SAE 15W-40
Transfer Gearbox
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
1.11
Premium
 MP Gear Lube SAE 80W-90
Transmission
From Hydraulics
Front Differential
Refer to Technical
5.81
Coolant
Refer to Technical
8.72
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 46 (a, b, c, d)
34.3
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
 Indol EH ISO 46
Grease Points
  (e)
Bogie Casing (each)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
7.53
Premium
 MP Gear Lube SAE 80W-90
Brake Housings
Refer to Technical
Crane Slew Gears
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
Premium
 MP Gear Lube SAE 80W-90
Front/Rear Bogie Differential
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90 (f)
2.11
Premium
 MP Gear Lube SAE 80W-90
Reduction Hubs
Refer to Technical

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations, -13°F to 167°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
b.
Alternative recommendations, -4°F to 194°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV
c.
Alternative recommendations, 14°F to 194°F: Indol Premium Anti-Wear Hydraulic Oil ISO 46 / Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol EH ISO 46
d.
Alternative recommendations, 32°F to 194°F: Hydrostatic Fluid ISO 46 MV
e.
Grease Points: manufacturer recommends grease with a temperature range of -30°C to 110°C with penetration of 265-295 MM/10, NLGI 2
f.
Differentials at high loads and high temperature, Maxtron GL 75W-140. Limited slip type is required where wet brakes occur but not demanded for other applications

Oil Change Intervals

Engine (DT) (SISU 66ETA 125kW)
Hours Min
250
Hours Max
400
Transfer Gearbox
Hours Max
500
Front Differential
Hours Max
500
Coolant
Months Max
12
Hydraulics
Hours Max
1000
Bogie Casing (each)
Hours Max
500
Brake Housings
Hours Max
1000
Front/Rear Bogie Differential
Hours Max
500
Reduction Hubs
Hours Max
500