Close Print

Maxtron DEO SAE 15W-40

Make
TIMBERJACK
Model
460 SA (Grapple Skidders)
Engine
DT
Application
Recommendation
Capacity (gal)
Engine (DT)
Premium
 Maxtron DEO SAE 15W-40
3.8
Mainline
 Superlube TMS SAE 15W-40
Transmission
Circle 3 STOU SAE 10W-30 (a)
12.9
Differential (T36ND)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
0.317
Premium
 MP Gear Lube SAE 80W-90
Coolant
Refer to Technical (b)
12.5
Cab Tilt Pump
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 46
0.151
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
 Indol EH ISO 46
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 46 (c, d, e, f, g)
19.3 / 23.0
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
 Indol EH ISO 46
Axles (front & rear)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
5.15 - 7.93
Premium
 MP Gear Lube SAE 80W-90
Drive Shafts & Bearings
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Joints Pins & Pivots
Maxtron EP NLGI 2
Wheel Hubs
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
0.132
Premium
 MP Gear Lube SAE 80W-90

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
T-40D winch, add 29 ltr. T-60 winch, add 39 ltr
b.
Mix ratio, 50% >-37°C
c.
Alternative recommendations, -29°F to 84°F: Refer to Technical
d.
Alternative recommendations, -15°F to 109°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
e.
Alternative recommendations, 0°F to 115°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV
f.
Alternative recommendations, 19°F to 115°F: Indol Premium Anti-Wear Hydraulic Oil ISO 46 / Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol EH ISO 46
g.
Alternative recommendations, 28°F to 115°F: Hydrostatic Fluid ISO 46 MV

Oil Change Intervals

Engine (DT)
Hours Max
250
Transmission
Hours Max
1000
Differential (T36ND)
Hours Max
1000
Coolant
Hours Max
2000
Hydraulics
Hours Max
1000
Axles (front & rear)
Hours Max
1000
Wheel Hubs
Hours Max
1000