• Search Again
  • Print
  • Send Via Email

Your selected equipment


Make
TIMBERJACK
Model
1110 (Forwarders)
Engine
DT

Application
Recommendation
Capacity (gal)
Data Sheet
Sales Sheet
Engine (DT) (Perkins 1006-6T)
Ultra Premium
Maxtron Enviro-Edge SAE 5W-40
(a)
3.96
Premium
Maxtron DEO SAE 15W-40
TDS
Mainline
Superlube TMS SAE 15W-40
TDS
Transmission
From Hydraulics
Hydraulics
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 46
(b, c)
32.2
TDS
Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
TDS
Mainline
Indol NZ ISO 46 MV
TDS
Coolant
 
8.45 (d)
Bogie Housing (each)
Ultra Premium
Maxtron GL Enviro-Edge SAE 75W-90
(e)
13.2
TDS
Premium
MP Gear Lube SAE 80W-90
TDS
Front Differential
Ultra Premium
Maxtron GL Enviro-Edge SAE 75W-90
(e)
7.93 / 3.17 (f)
TDS
Premium
MP Gear Lube SAE 80W-90
TDS
Front Hubs (each)
Ultra Premium
Maxtron GL Enviro-Edge SAE 75W-90
1.06
TDS
Premium
MP Gear Lube SAE 80W-90
TDS
Grease Points
Ultra Premium
Red Protect XT NLGI 2
Premium
Maxtron FS
Mainline
Molyplex 500+ EP NLGI 2
TDS
High-Low Range Gearbox
Ultra Premium
Maxtron GL Enviro-Edge SAE 75W-90
(e)
1.19
TDS
Premium
MP Gear Lube SAE 80W-90
TDS
Loader Slew Housing
Ultra Premium
Maxtron GL Enviro-Edge SAE 75W-90
(e)
1.85
TDS
Premium
MP Gear Lube SAE 80W-90
TDS
Rear Differential
Ultra Premium
Maxtron GL Enviro-Edge SAE 75W-90
(e)
3.17
TDS
Premium
MP Gear Lube SAE 80W-90
TDS
Engine (DT) (Perkins 1006-6T)
Recommendation:
Ultra Premium Maxtron Enviro-Edge SAE 5W-40
Premium Maxtron DEO SAE 15W-40
Mainline Superlube TMS SAE 15W-40
(a)
Capacity 3.96(gal)
Transmission
Recommendation:
From Hydraulics
Hydraulics
Recommendation:
Ultra Premium Indol Premium Anti-Wear Hydraulic Oil ISO 46
Premium Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline Indol NZ ISO 46 MV
(b, c)
Capacity 32.2(gal)
Coolant
Recommendation:
Capacity 8.45(gal) (d)
Bogie Housing (each)
Recommendation:
Ultra Premium Maxtron GL Enviro-Edge SAE 75W-90
Premium MP Gear Lube SAE 80W-90
(e)
Capacity 13.2(gal)
Front Differential
Recommendation:
Ultra Premium Maxtron GL Enviro-Edge SAE 75W-90
Premium MP Gear Lube SAE 80W-90
(e)
Capacity 7.93 / 3.17(gal) (f)
Front Hubs (each)
Recommendation:
Ultra Premium Maxtron GL Enviro-Edge SAE 75W-90
Premium MP Gear Lube SAE 80W-90
Capacity 1.06(gal)
Grease Points
Recommendation:
Ultra Premium Red Protect XT NLGI 2
Premium Maxtron FS
Mainline Molyplex 500+ EP NLGI 2
High-Low Range Gearbox
Recommendation:
Ultra Premium Maxtron GL Enviro-Edge SAE 75W-90
Premium MP Gear Lube SAE 80W-90
(e)
Capacity 1.19(gal)
Loader Slew Housing
Recommendation:
Ultra Premium Maxtron GL Enviro-Edge SAE 75W-90
Premium MP Gear Lube SAE 80W-90
(e)
Capacity 1.85(gal)
Rear Differential
Recommendation:
Ultra Premium Maxtron GL Enviro-Edge SAE 75W-90
Premium MP Gear Lube SAE 80W-90
(e)
Capacity 3.17(gal)

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations, Perkins: -22°F to 32°F, CF-4/E2 0W; -13°F to 68°F, CF-4/E2 5W-20; -4°F to 104°F, Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30; 5°F to 122°F, Maxtron Enviro-Edge SAE 5W-40 / Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40; 23°F to 122°F, CF-4/E2 20W-50; 32°F to 77°F, CF-4/E2 20; 41°F to 104°F, Superlube TMS SAE 15W-40; 59°F to 122°F, Superlube TMS SAE 15W-40
b.
Timberjack list Neste BIO HYDR 46 and BP BIOHYD SE 46 as suitable synthetic biodegradable fluids
c.
Alternative recommendations: -29°F to 84°F, HV 15; -15°F to 109°F, Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV; 0°F to 115°F, Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol NZ ISO 46 MV / Hydrostatic Fluid ISO 46 MV; 19°F to 115°F, Indol Premium Anti-Wear Hydraulic Oil ISO 46 / Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol NZ ISO 46 MV; 28°F to 115°F, Indol NZ ISO 46 MV / Hydrostatic Fluid ISO 46 MV
d.
For protection down to -38°C mixing ratio should be 50%, i.e. 1 part water to 1 part concentrate
e.
SAE 90, 85W-90, 75W-90 can be used in place of 80W-90
f.
6 wheel/8 wheel

Oil Change Intervals

There is no Oil Change Interval data to display for this model