Close Print

Maxtron Enviro-Edge SAE 5W-40

Make
WACKER NEUSON
Model
3503 Tier4f (Tracked Excavators)
Engine
D
Year
2016-
Application
Recommendation
Capacity (gal)
Engine (D) (Perkins 404F-22, 2.216L, 4-cyl; 29.8kW)
Maxtron Enviro-Edge SAE 5W-40 (a, b, c)
2.8
Transmission
From Hydraulics
Coolant
Refer to Technical (d)
1.19
Hydraulics
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV (e, f, g, h)
13.2
Premium
Hydrostatic Fluid ISO 46 MV
Hydraulics (With Hammer Unit - >80% / 20% usage)
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV (i, j, k, l)
7.13
Premium
Hydrostatic Fluid ISO 46 MV
Grease Points
Maxtron EP NLGI 2
Travel Gearbox (each)
Ultra Premium
Maxtron Enviro-EDGE GL 75W-90
0.159
Premium
MP Gear Lube SAE 80W-90

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
>-4°F
b.
Alternative recommendations, >-4°F to 86°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
c.
Alternative recommendations, >5°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
d.
Mix ratio, 50% >-37°C
e.
23°F to 104°F
f.
Alternative recommendations, -4°F to 86°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV
g.
Alternative recommendations, 23°F to 104°F: Refer to Technical
h.
Alternative recommendations, 41°F to 122°F: Hydrostatic Fluid ISO 46 MV
i.
23°F to 104°F
j.
Alternative recommendations, -4°F to 86°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV
k.
Alternative recommendations, 23°F to 104°F: Refer to Technical
l.
Alternative recommendations, 41°F to 122°F: Hydrostatic Fluid ISO 46 MV

Oil Change Intervals

Engine (D) (Perkins 404F-22, 2.216L, 4-cyl; 29.8kW)
Months Max
12
Hours Max
500
Coolant
Months Max
24
Hours Max
2000
Hydraulics
Months Max
12
Hours Max
1000
Hydraulics (With Hammer Unit - >80% / 20% usage)
Hours Min
200
Hours Max
800
Travel Gearbox (each)
Hours Max
1000