Close Print
Make
TEREX FUCHS
Model
MHL360 Tier2 (S/N 177 to 235) (Material Handlers)
Engine
DT
Year
2003-
Application
Recommendation
Capacity (gal)
Engine (DT) (Deutz BF 6 M 1013 FC; 186kW)
Refer to Technical
5.28
Transmission (2-speed powershift)
Refer to Technical
1.45
Front Axle Differential
Refer to Technical
3.43
Rear Axle Differential
Refer to Technical
5.02
Coolant
Refer to Technical (a)
10.0
Hydraulics
Ultra Premium
Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV (b, c)
137
Premium
Hydrostatic Fluid ISO 46 MV
Front Axle Hubs (each)
Refer to Technical
0.396
Centralised Lubrication System (Grease)
Ultra Premium
Maxtron FS NLGI 2
1.06
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Grab Gear
Refer to Technical
0.185
Rear Axle Hubs (each)
Refer to Technical
0.396
Service Brake
From Hydraulics
Swing Gearbox
Refer to Technical
1.72

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Mix ratio, 50% >-40°C
b.
5°F to 95°F
c.
Alternative recommendations, 14°F to 104°F: Hydrostatic Fluid ISO 46 MV

Oil Change Intervals

Engine (DT) (Deutz BF 6 M 1013 FC; 186kW)
Months Max
12
Hours Max
500
Transmission (2-speed powershift)
Months Max
12
Hours Max
1000
Front Axle Differential
Months Max
12
Hours Max
2000
Rear Axle Differential
Months Max
12
Hours Max
2000
Coolant
Months Max
24
Hydraulics
Months Max
12
Hours Max
3000
Front Axle Hubs (each)
Months Max
12
Hours Max
2000
Grab Gear
Hours Max
3000
Rear Axle Hubs (each)
Months Max
12
Hours Max
2000
Swing Gearbox
Months Max
12
Hours Max
1000