Close Print

Maxtron DEO SAE 15W-40

Make
ORENSTEIN & KOPPEL
Model
RH 1.17 (Tracked Mini Excavators)
Engine
D / DT
Application
Recommendation
Capacity (gal)
Engine (D / DT) (Mitsubishi)
Premium
 Maxtron DEO SAE 15W-40 (a, b, c, d, e)
0.951
Mainline
 Superlube TMS SAE 15W-40
Transmission
From Hydraulics
Coolant
Refer to Technical
1.11
Hydraulics
Hydrostatic Fluid ISO 46 MV (f, g, h, i, j)
9.25
Grease
Ultra Premium
 Maxtron FS NLGI 2 (k, l, m)
Premium
 Blue Gard 500+ NLGI 2
Mainline
 ML 365 Grease EP NLGI 2
Crawler Drive Gearboxes (each)
Refer to Technical (n)
0.079
On-board crane (if fitted): Driving motor
Premium
 Maxtron DEO SAE 15W-40
Mainline
 Superlube TMS SAE 15W-40
On-board crane (if fitted): Hydraulic system
Ultra Premium
 Hydrostatic Fluid ISO 46 MV
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 68
Mainline
 Vacuum Pump Oil (ISO 68)
Swing Gearbox
Refer to Technical (n)
0.053

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations, -22°F to 32°F: Refer to Technical
b.
Alternative recommendations, -13°F to 68°F: Refer to Technical
c.
Alternative recommendations, 5°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
d.
Alternative recommendations, 14°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
e.
Alternative recommendations, 23°F to 122°F: Refer to Technical
f.
Alternative recommendations, -13°F to 68°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol Premium Anti-Wear Hydraulic Oil ISO 15
g.
Alternative recommendations, -4°F to 77°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV
h.
Alternative recommendations, 5°F to 95°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV
i.
Alternative recommendations, 14°F to 104°F: Hydrostatic Fluid ISO 46 MV
j.
Alternative recommendations, 32°F to 122°F: Refer to Technical
k.
Alternative recommendations, -22°F to 68°F: Blue Gard 500+ NLGI 0
l.
Alternative recommendations, -18°F to 95°F: Blue Gard 500+ NLGI 1 / ML 365 Grease EP NLGI 1 / Maxtron EP NLGI 1
m.
Alternative recommendations, -4°F to 122°F: Maxtron FS NLGI 2 / Blue Gard 500+ NLGI 2 / ML 365 Grease EP NLGI 2
n.
Gear oil viscosity options: -20°C to 42°C, Multigrade Gear oil, Part No. 1 589 636; 5°C to 50°C, 140; -12°C to 42°C, 90; -20°C to 25°C, 80W

Oil Change Intervals

Engine (D / DT) (Mitsubishi)
Hours Max
250
Coolant
Months Max
24
Hours Max
1000
Hydraulics
Hours Max
1000
Crawler Drive Gearboxes (each)
Months Max
12
Hours Max
1000
On-board crane (if fitted): Driving motor
Months Max
12
Hours Max
500
On-board crane (if fitted): Hydraulic system
Months Max
12
Hours Max
1000
Swing Gearbox
Hours Max
1000