Close Print

Maxtron Enviro-Edge SAE 5W-40

Make
LIEBHERR
Model
A924 C Plus Litronic (without DPF) (Wheeled Excavators)
Engine
DT
Year
2010-
Application
Recommendation
Capacity (gal)
Engine (DT) (Liebherr D 934L Tier3/Stage3A; 135kW)
Maxtron Enviro-Edge SAE 5W-40 (a, b)
7.66
Transmission (2-speed powershift)
Maxtron Enviro-Edge SAE 5W-40
0.793
Coolant
Refer to Technical (c)
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 46 (d, e, f)
114
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
 Indol EH ISO 46
Grease Points
Ultra Premium
 Maxtron FS NLGI 2 (g)
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Pump Drive Gearbox
Refer to Technical
0.502
Reduction Hubs (x 4)
Refer to Technical (h)
0.66 - 0.793
Rigid Axle (type 1049/1050 & 1051)
Refer to Technical (i)
3.83 / 5.02
Steering Axle (type 1049/1050 & 1051)
Refer to Technical (j)
2.91 / 7.0
Swing Gearbox
Refer to Technical (k)
1.59

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
-4°F to 113°F
b.
Alternative recommendations, -22°F to 86°F: Refer to Technical; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
c.
Mix ratio, 50% >-37°C
d.
32°F to 104°F
e.
Alternative recommendations, 41°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
f.
Alternative recommendations, 50°F to 113°F: Hydrostatic Fluid ISO 46 MV
g.
Alternative recommendations: Blue Gard 500+ NLGI 1 / Maxtron EP NLGI 1 / Maxtron FS NLGI 1
h.
-22°F to 122°F
i.
-22°F to 122°F
j.
-22°F to 122°F
k.
-22°F to 122°F

Oil Change Intervals

Engine (DT) (Liebherr D 934L Tier3/Stage3A; 135kW)
Hours Max
500
Transmission (2-speed powershift)
Hours Max
500
Coolant
Months Max
24
Hours Max
2000
Hydraulics
Hours Max
2000
Pump Drive Gearbox
Hours Max
1000
Reduction Hubs (x 4)
Hours Max
1000
Rigid Axle (type 1049/1050 & 1051)
Hours Max
1000
Steering Axle (type 1049/1050 & 1051)
Hours Max
1000
Swing Gearbox
Hours Max
1000