Close Print

Maxtron Enviro-Edge SAE 5W-40

Make
LIEBHERR
Model
A312 Litronic Type 1037 (S/N 57081 - Up) with DPF (Wheeled Excavators)
Engine
DT
Year
2011-
Application
Recommendation
Capacity (gal)
Engine (DT) (Deutz TCD2012 LO4, 81 kW, Tier3/Stage 3A)
Maxtron Enviro-Edge SAE 5W-40 (a, b)
4.1
Transmission
Maxtron Enviro-Edge SAE 5W-40
0.793
Coolant
Refer to Technical
6.6
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 46 (c, d, e)
44.9
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
 Indol EH ISO 46
Grease Points
Ultra Premium
 Maxtron FS NLGI 2 (f, g)
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Hubs (Steering Axle, each)
Refer to Technical (h)
0.793
Rigid Axle
Refer to Technical (i)
2.77
Slewing Gear
Refer to Technical (j)
1.16
Steering Axle
Refer to Technical (k)
2.17

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
-4°F to 104°F
b.
Alternative recommendations, -22°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
c.
-4°F to 104°F
d.
Alternative recommendations, 5°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
e.
Alternative recommendations, 14°F to 113°F: Hydrostatic Fluid ISO 46 MV
f.
Normal Temperature
g.
Alternative recommendations, Low Temperature: Blue Gard 500+ NLGI 1 / Maxtron EP NLGI 1 / Maxtron FS NLGI 1
h.
-22°F to 122°F
i.
-22°F to 122°F
j.
-22°F to 122°F
k.
-22°F to 122°F

Oil Change Intervals

Engine (DT) (Deutz TCD2012 LO4, 81 kW, Tier3/Stage 3A)
Hours Max
250
Transmission
Hours Max
1000
Coolant
Months Max
24
Hours Max
3000
Hydraulics
Hours Max
2000
Hubs (Steering Axle, each)
Hours Max
2000
Rigid Axle
Hours Max
2000
Slewing Gear
Hours Max
1000
Steering Axle
Hours Max
2000