Close Print

Maxtron DEO SAE 15W-40

Make
KOMATSU
Model
PW98MR-6 (PW 6 Series Wheeled)
Engine
DT
Application
Recommendation
Capacity (gal)
Engine (DT) (Komatsu S4D95LE-3 51kW)
Premium
 Maxtron DEO SAE 15W-40 (a, b, c, d)
2.77
Mainline
 Superlube TMS SAE 15W-40
Rear Axle (Differential)
Ultra Premium
 Maxtron THF +
2.38
Premium
 Qwiklift HTB
Rear Axle (Final Reductions, each)
Ultra Premium
 Maxtron THF +
0.211
Premium
 Qwiklift HTB
Transmission
From Hydraulics
Front Axle (Differential)
Ultra Premium
 Maxtron THF +
2.38
Premium
 Qwiklift HTB
Front Axle (Final Reductions, each)
Ultra Premium
 Maxtron THF +
0.211
Premium
 Qwiklift HTB
Coolant
Refer to Technical
4.76
Hydraulics (First fill/Change)
Premium
 Maxtron DEO SAE 15W-40 (e, f, g)
29.1 / 16.9
Mainline
 Superlube TMS SAE 15W-40
Grease Points
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Articulation Bearing
Maxtron EP NLGI 2
Ring Gear & Pinion
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Swing Reduction Gear
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
0.793
Premium
 MP Gear Lube SAE 80W-90
Transmission Reduction Gear
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
0.396
Premium
 MP Gear Lube SAE 80W-90

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
5°F to 113°F
b.
Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
c.
Alternative recommendations, -4°F to 50°F: Superlube 518 Diesel Engine Oil SAE 10W
d.
Alternative recommendations, 32°F to 104°F: Superlube 518 Diesel Engine Oil SAE 30 / Superlube TMS SAE 10W-30
e.
Also recommended, Refer to Technical
f.
5°F to 113°F
g.
Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30; Superlube 518 Diesel Engine Oil SAE 10W

Oil Change Intervals

Engine (DT) (Komatsu S4D95LE-3 51kW)
Hours Max
250
Rear Axle (Differential)
Hours Max
1000
Rear Axle (Final Reductions, each)
Hours Max
1000
Front Axle (Differential)
Hours Max
1000
Front Axle (Final Reductions, each)
Hours Max
1000
Coolant
Months Max
24
Hours Max
4000
Hydraulics (First fill/Change)
Hours Max
2000
Swing Reduction Gear
Hours Max
1000
Transmission Reduction Gear
Hours Max
2000