• Search Again
  • Print
  • Send Via Email

Your selected equipment


Make
FMC CORPORATION
Model
Link-Belt LS7400A (Cummins) (Tracked)
Engine
D / DT

Application
Recommendation
Capacity (gal)
Data Sheet
Sales Sheet
Engine (D / DT)
Ultra Premium
Maxtron DEO SAE 15W-40
(b)
(a)
TDS
Premium
Superlube TMS SAE 15W-40
TDS
Hydraulics
Hydrostatic Fluid ISO 46 MV
(c, d)
(a)
TDS
Coolant
Refer To Equipment Dealer
(a)
General Grease Points
Ultra Premium
Maxtron EP NLGI 2
TDS
Premium
Blue Gard 500+ #2 or Molyplex 500+ #2
TDS
Lower Gear Reduction
Ultra Premium
Maxtron GL SAE 80W-140
(a)
TDS
Premium
MP Gear Lube SAE 85W-140
TDS
Planetary Track Drives
Ultra Premium
Maxtron GL SAE 80W-140
(a)
TDS
Premium
MP Gear Lube SAE 85W-140
TDS
Pump Drive Gearbox
Ultra Premium
Maxtron GL SAE 80W-140
(a)
TDS
Premium
MP Gear Lube SAE 85W-140
TDS
Speed Reducer
Ultra Premium
Maxtron GL SAE 80W-140
(a)
TDS
Premium
MP Gear Lube SAE 85W-140
TDS
Turntable Bearings
Ultra Premium
Maxtron EP NLGI 2
TDS
Premium
Blue Gard 500+ #2 or Molyplex 500+ #2
TDS
Turntable Gear Teeth
Refer To Equipment Dealer
Engine (D / DT)
Recommendation:
Ultra Premium Maxtron DEO SAE 15W-40
Premium Superlube TMS SAE 15W-40
(b)
(a)
Hydraulics
Recommendation:
Ultra Premium Hydrostatic Fluid ISO 46 MV
(c, d)
(a)
Coolant
Recommendation:
Ultra Premium Refer To Equipment Dealer
(a)
General Grease Points
Recommendation:
Ultra Premium Maxtron EP NLGI 2
Premium Blue Gard 500+ #2 or Molyplex 500+ #2
Lower Gear Reduction
Recommendation:
Ultra Premium Maxtron GL SAE 80W-140
Premium MP Gear Lube SAE 85W-140
(a)
Planetary Track Drives
Recommendation:
Ultra Premium Maxtron GL SAE 80W-140
Premium MP Gear Lube SAE 85W-140
(a)
Pump Drive Gearbox
Recommendation:
Ultra Premium Maxtron GL SAE 80W-140
Premium MP Gear Lube SAE 85W-140
(a)
Speed Reducer
Recommendation:
Ultra Premium Maxtron GL SAE 80W-140
Premium MP Gear Lube SAE 85W-140
(a)
Turntable Bearings
Recommendation:
Ultra Premium Maxtron EP NLGI 2
Premium Blue Gard 500+ #2 or Molyplex 500+ #2
Turntable Gear Teeth
Recommendation:
Ultra Premium Refer To Equipment Dealer

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Capacity unquoted
b.
Alternative recommendations: >0°F, 15W-40; -13°F to 68°F, 10W-30
c.
FMC Hi-Performance Hydraulic Oil or approved equivalent. Viscosities designated as 10W-20, 5W-20, 20W-40 and 5W; oil formulated to prevent filter plugging in presence of condensation. Must be filtered through 3 micron absolute filter into system tank if drum previously opened
d.
Alternative recommendations: 10°F to 90°F, 46; -6°F to 64°F, 32; 30°F to 115°F, 68; -35°F to 19°F, 5W

Oil Change Intervals

There is no Oil Change Interval data to display for this model