Your selected equipment
- Make
- CATERPILLAR
- Model
- M325B (Wheeled Excavators B Series)
- Engine
- DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
|---|---|---|---|---|---|
Engine (DT) |
Premium
|
Maxtron DEO SAE 15W-40
(a)
|
5.28
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Rear Axle |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
4.49
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Transmission |
Premium
|
Maxtron Power Transmission Fluid MV
|
4.49
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Front Axle |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
5.28
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Coolant |
Refer to Technical
|
8.72
|
|||
Hydraulics (Reservoir/System) |
Indol EH ISO 46
(b, c, d, e, f)
|
39.6 / 81.9
|
|||
Front Axle Bearings |
Maxtron EP NLGI 2
|
|
|||
Front Final Drives (each) |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
0.793
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Greases: Molybdenum |
Maxtron EP NLGI 2
|
|
|||
Greases: Multipurpose |
Ultra Premium
|
Maxtron FS NLGI 2
|
|
||
Premium |
Maxtron EP NLGI 2
|
||||
Mainline |
Blue Gard 500+ NLGI 2
|
||||
Greases: Special Purpose (high temp. antifriction bearings) |
Poly-Xtreme NLGI 2
|
|
|||
Rear Final Drives (each) |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
1.9
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Swing Gear |
Ultra Premium
|
Maxtron FS NLGI 2
|
|
||
Premium |
Maxtron EP NLGI 2
|
||||
Mainline |
Blue Gard 500+ NLGI 2
|
||||
Swing Gearbox |
Power Transmission Fluid SAE 50
(g, h, i, j, k)
|
2.11
|
|||
Engine (DT)
Capacity 5.28(gal)
Rear Axle
Capacity 4.49(gal)
Transmission
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Capacity 4.49(gal)
Front Axle
Capacity 5.28(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 8.72(gal)
Hydraulics (Reservoir/System)
Capacity 39.6 / 81.9(gal)
Front Final Drives (each)
Capacity 0.793(gal)
Greases: Multipurpose
Recommendation:
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Greases: Special Purpose (high temp. antifriction bearings)
Rear Final Drives (each)
Capacity 1.9(gal)
Swing Gear
Recommendation:
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Swing Gearbox
Capacity 2.11(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
- b.
- Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
- c.
- 23°F to 113°F
- d.
- Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- e.
- Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
- f.
- Alternative recommendations, 32°F to 122°F: Refer to Technical
- g.
- 5°F to 122°F
- h.
- Alternative recommendations, -22°F to 77°F: Maxtron Power Transmission Fluid MV
- i.
- Alternative recommendations, -22°F to 32°F: Power Transmission Fluid SAE 10W
- j.
- Alternative recommendations, -13°F to 95°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
- k.
- Alternative recommendations, 5°F to 122°F: Power Transmission Fluid SAE 50
Oil Change Intervals
Engine (DT)
- Months Max
- 3
- Hours Max
- 500
Rear Axle
- Months Max
- 6
- Hours Max
- 1000
Transmission
- Months Max
- 12
- Hours Max
- 2000
Front Axle
- Months Max
- 6
- Hours Max
- 1000
Coolant
- Months Max
- 24
- Hours Max
- 2000
Hydraulics (Reservoir/System)
- Months Max
- 18
- Hours Max
- 3000
Front Axle Bearings
- Months Max
- 6
- Hours Max
- 1000
Front Final Drives (each)
- Hours Max
- 2000
Rear Final Drives (each)
- Months Max
- 6
- Hours Max
- 1000
Swing Gearbox
- Months Max
- 6
- Hours Max
- 1000