Maxtron DEO SAE 15W-40

Make: CATERPILLAR
Model: 5130B (Tracked Excavators)
Engine: DT

Application	Recommendation		Capacity (gal)
Engine (DT)	Premium	Maxtron DEO SAE 15W-40 (a)	33.0
Engine (DT)	Mainline	Superlube TMS SAE 15W-40	33.0
Final Drives (each)	Power Transmission Fluid SAE 50 (b, c, d, e, f)		8.19
Coolant	Refer to Technical		132
Hydraulics (Tank/System)	Indol EH ISO 46 (g, h, i, j, k)		317 / 423
Greases: Molybdenum	Maxtron EP NLGI 2
Greases: Multipurpose	Ultra Premium	Maxtron FS NLGI 2
	Premium	Maxtron EP NLGI 2
	Mainline	Blue Gard 500+ NLGI 2
Greases: Special Purpose (high temp. antifriction bearings)	Poly-Xtreme NLGI 2
Pump Drive	Premium	Maxtron Power Transmission Fluid MV	20.3
Pump Drive	Mainline	Power Transmission Fluid SAE 30	20.3
Rollers & Idlers	Superlube TMS SAE 10W-30 (l, m, n, o, p)		0.66
Swing Gearboxes (each)	Power Transmission Fluid SAE 50 (q, r, s, t, u)		3.7

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: 5°F to 122°F
c.: Alternative recommendations, -22°F to 77°F: Maxtron Power Transmission Fluid MV
d.: Alternative recommendations, -22°F to 32°F: Power Transmission Fluid SAE 10W
e.: Alternative recommendations, -13°F to 77°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
f.: Alternative recommendations, 5°F to 122°F: Power Transmission Fluid SAE 50
g.: Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
h.: 23°F to 113°F
i.: Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
j.: Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
k.: Alternative recommendations, 32°F to 122°F: Refer to Technical
l.: -4°F to 77°F
m.: Alternative recommendations: Refer to Technical
n.: Alternative recommendations, -31°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
o.: Alternative recommendations, 14°F to 104°F: Superlube TMS SAE 15W-40
p.: Alternative recommendations, 32°F to 122°F: Refer to Technical
q.: 5°F to 122°F
r.: Alternative recommendations, -22°F to 77°F: Maxtron Power Transmission Fluid MV
s.: Alternative recommendations, -22°F to 32°F: Power Transmission Fluid SAE 10W
t.: Alternative recommendations, -13°F to 95°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
u.: Alternative recommendations, 5°F to 122°F: Power Transmission Fluid SAE 50

Oil Change Intervals

Engine (DT)

Months Max: 3
Hours Max: 500

Final Drives (each)

Months Max: 12
Hours Max: 2000

Coolant

Months Max: 24
Hours Max: 2000

Hydraulics (Tank/System)

Months Max: 18
Hours Max: 3000

Pump Drive

Months Max: 36
Hours Max: 5000

Swing Gearboxes (each)

Months Max: 6
Hours Max: 1000